Epson Stylus 300 User Manual - Page 80
Default settings, LOAD/EJECT button. - download
View all Epson Stylus 300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Software initialization Control panel initialization * Software sends the ESC @ (initialize the printer) command. The following condition then results: 1) The print buffer is cleared. 2) The default values are set. (The last panel settings are maintained.) * Hold down the ALT button and press the LOAD/EJECT button. The following results: 1) The printer mechanism is initialized. 2) The input data buffer is cleared. 3) The download character set is cleared. 4) The print buffer is cleared. 5) The default values are set. (The last panel settings are kept.) Default settings The table below shows the default settings that take effect when the printer is initialized. Item Top-of-form position Page length Left and right margins Line spacing Character size Vertical tab position Horizontal tab positions Font selection Special printing effects Download character set Default setting Current paper position Single sheets: 65 lines for A4-size paper 61 lines for letter-size paper 22 inches for manual insertion Cancelled 1 Mnch line spacing 10.5 point Cleared Every eight characters Last font selected on control panel Cancelled (except condensed printing) Hardware/control panel ,initialization: cleared Software initialization: deselected only In addition, hardware and control panel initialization clears the data buffer. Appendix A-11