Epson Stylus C66 Start Here Card - Page 3

Connect the Printer - software

Get Epson Stylus C66 - Ink Jet Printer PDF manuals and user guides View all Epson Stylus C66 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 3 highlights

continued 4 Lower each ink cartridge into its holder with the green circuit board facing the front. Then gently push each ink cartridge down until it is firmly seated. The color of the cartridge label should match the marker on the holder. 5 Close the cartridge cover. 6 Close the printer cover and press the ink button. The green power light flashes as your printer charges ink for several seconds. Caution: Don't turn off the printer while the green power light is flashing, unless the printer hasn't moved or made noise for more than 5 minutes. 4 Connect the Printer 1 Make sure your computer is turned off. Keep it turned off until section 6, "Install Software." 2 Plug the flat end of the cable into any available USB port on your computer. 3 Plug the square end of the cable into the USB port on your printer.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
4
Lower each ink cartridge into its holder with the green circuit board
facing the front.
Then gently push each ink cartridge down until it is firmly seated.
The color of the cartridge label should match the marker on the
holder.
5
Close the cartridge cover.
6
Close the printer cover and press the
ink button.
The green
power light flashes as your printer charges ink
for several seconds.
Caution:
Don’t turn off the printer while the green
power light
is flashing, unless the printer hasn’t moved or made noise for
more than 5 minutes.
continued
1
Make sure your computer is turned off. Keep it turned off until
section 6, “Install Software.”
2
Plug the
flat end of the cable into any available USB port
on your computer.
3
Plug the
square end of the cable into the USB port
on your printer.
Connect the Printer
4