Epson Stylus C66 Start Here Card - Page 7

6 Click CD-ROM drive. Make sure Floppy disk drive and Specify a location are not checked, then click Next. 7 At the next screen, click Next. Installation proceeds automatically. 8 When installation halts, click Finish. 9 You see the license agreement. Read the agreement and click Agree. You see the Options Menu. Continue with the instructions in "Finishing Software Installation" to complete the software installation. Finishing Software Installation 1 Make sure you have paper loaded in the printer. Then click Print a Test Page to check that your printer is set up correctly. 2 Click Install Epson Software Film Factory and follow the instructions on the screen. Note: If you see a message about installing QuickTime®, click Yes and follow the instructions on the screen. You don't need a registration number. 3 Click Install Epson Printer Information Center to install it on your desktop. Note: You need a browser-such as Microsoft® Internet Explorer 4.0 or later or Netscape Navigator® 4.0 or later-to view the guide. 4 Click Add Epson Photo Website Links and follow the instructions on the screen. 5 When you're finished, click Back to return to the Options Menu. 6 Click Install Epson Web-To-Page and follow the instructions on the screen. 7 When you're finished, click Exit to close the Options Menu. 8 When you see the Epson Product Registration screen, register your printer as instructed, then remove the Epson CD. You're ready to print! See your Quick Guide for details. Problems? If your problem is listed here, try these suggestions. For more information, see your software Help, your Quick Guide, or your on-screen Epson Printer Information Center. You don't see the Found (or Add) New Hardware Wizard screen when installing the printer software. Make sure your printer is on and the USB cable is securely connected to your printer's USB port. If you still don't see the screen, try connecting your printer to a different USB port on your computer. The red paper light is on (nothing prints). If paper is out, load more paper and press the paper button to resume printing. If paper is jammed, press the paper button to eject it. If the paper doesn't eject, turn off the printer, open the cover, and pull the paper out from the front. Then reload paper, turn the printer on, and press the paper button. Paper jams frequently. Use new, smooth, high-quality paper. Don't load paper above the arrow mark inside the left edge guide. Place paper behind the tabs. Slide the left edge guide against the paper, but not too tightly.