Epson Stylus Pro 4900 Designer Edition Quick Reference Guide - Page 8
Replacing Printer Parts, Replacing the Paper Cutter
View all Epson Stylus Pro 4900 Designer Edition manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Checking Ink Levels and Replacing Ink Cartridges (continued) 4 Make sure the replacement cartridge is the correct color and remove it from its package. Gently shake the cartridge before installing it. 6 Close the ink cover. 5 Hold the cartridge with the arrow mark pointing toward the printer. Then insert the cartridge into the slot. Don't force it. Note: If you can't insert the cartridge smoothly, you may have the wrong cartridge or are trying to insert it into the wrong slot. Check the package and part number. If the Ink light remains on after installing the cartridge, try removing and then reinserting it. Replacing Printer Parts Replacing the Paper Cutter If you notice that the paper isn't cut cleanly, you may need to replace the cutter (part # C1C815351). 1 Turn off the printer. 2 Open the ink cartridge covers. 4 Use a cross-head screwdriver to remove the four screws holding the front cover in place, then remove the front cover. 3 Open the printer cover. 7