Epson Stylus Pro 7900 Computer To Plate System User's Guide - Page 4
PCU Safety Instructions - stylus pro computer computer to plate
View all Epson Stylus Pro 7900 Computer To Plate System manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
4 | PCU Safety Instructions PCU Safety Instructions Before using your PCU, read the following safety instructions to make sure you use the equipment safely and effectively. • The electronics and heating element use dangerous electrical voltages. To reduce the chance of personal injury or property damage, turn off and unplug the PCU when maintaining the system. • Always turn off the PCU using the Heater switch on the control panel first. When the PCU temperature reads less than 100 °C it is safe to turn off the PCU by the main power switch in the back of the unit. Failure to follow this could result in a shortening of the life of the mechanism that moves the plate through the PCU. • The PCU heater reaches high temperatures during plate curing. Do not touch the slot area where the plate comes out on the tray. • Aluminum plates are hot when they exit the PCU. Let the plate cool before removing from the tray. • Make sure the plate is dry when feeding it into the PCU; if the plate is wet, it could create steam and cause burns. • Do not open the PCU because of electric shock danger. • Do not run the PCU with the protective cover open or removed. • Place the PCU on a flat, level, stable surface that is larger than the unit. The PCU will not operate properly if it is tilted or at an angle. • The PCU weighs about 55 lb (25 kg) in the box and is bulky, so it should be handled by two people. • Do not disable the safety mechanisms installed by the manufacturer in the PCU. See additional safety instructions for the printer in the Epson Stylus Pro 7900/9900 Printer Guide.