Epson Stylus Pro 9600 - UltraChrome Ink Service Manual - Page 21
Mechanism Specifications
View all Epson Stylus Pro 9600 - UltraChrome Ink manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
EPSON Stylus Pro 7600/9600 1.2.6 Mechanism Specifications 1.2.6.1 Printable Area Table 1-15. Printable Area Item Roll paper /Sheet Model PW (Paper width) Roll paper Stylus Pro 7600 Stylus Pro 9600 Sheet Stylus Pro 7600 Stylus Pro 9600 PL Roll paper Stylus Pro 7600/Stylus Pro 9600 (Paper length) Sheet Stylus Pro 7600/Stylus Pro 9600 TM (Top margin) Roll paper Stylus Pro 7600/Stylus Pro 9600 Sheet Stylus Pro 7600/Stylus Pro 9600 BM Roll paper Stylus Pro 7600/Stylus Pro 9600 (Bottom margin) Sheet Stylus Pro 7600/Stylus Pro 9600 LM (Left margin) Roll paper Stylus Pro 7600/Stylus Pro 9600 Sheet Stylus Pro 7600/Stylus Pro 9600 RM Roll paper Stylus Pro 7600/Stylus Pro 9600 (Right margin) Sheet Stylus Pro 7600/Stylus Pro 9600 Dimension 203 mm ~ 610 mm 203 mm ~ 1118 mm 203 mm ~ 610 mm 203 mm ~ 1118 mm Max. 202m 279 mm ~ 1580 mm 3 mm/15 mm 3 mm 3 mm/15 mm 14 mm 0 mm/3 mm/15 mm 0 mm/3 mm 0 mm/3 mm/15 mm 0 mm/3 mm Paper Feed Direction Revision A For borderless print, right and left margins are 3mm each because skew detection limit is 3mm. If the distance from the paper edge to the platen (sponge width) is less than 3mm, the maximum surplus print quantity without ink discharge onto the platen (0mm~3mm) is printable area. Printable Area The printer detects paper width when paper is set. (If paper width detection setting is OFF, it does not detect paper width.) It does not print the image beyond the detected paper width or the printable area specified by paper size setting. (It may print on the platen if paper width detection setting is OFF.) Margins of roll paper can be changed on the panel as follows; Top/bottom 15 mm, left/right 3 mm Top/bottom/left/right 3 mm Top/bottom/left/right 15 mm NOTE: Under special conditions, it is possible to set right and left margin (LM, RM) to 0. Figure 1-1. Printable Area Product Description Basic Specifications 21