Epson Stylus Pro 9600 - UltraChrome Ink Product Information Guide - Page 2

EPSON Stylus Pro 7600 and 9600 Electrical Specification Input voltage range Rated frequency range Input frequency range Rated current Power consumption 120V Model 90 to 132V 220−240V Model 198 to 264V 50 to 60 Hz 49 to 61 Hz 1.0A 0.5A Stylus Pro 7600: Approx. 50 W (ISO 10561 Letter Pattern) Stylus Pro 9600: Approx. 55 W (ISO 10561 Letter Pattern) Both printers: 12 W or less in sleep mode Mechanical Paper feed Friction feed (roll and cut sheet) Paper path Dimensions Roll paper or cut sheets with manual insertion Stylus Pro 7600: Width: 43.3 inches (1100 mm) Depth: 22.5 inches (572 mm) Height: 22.0 inches (560 mm) Stylus Pro 9600: Width: 63.9 inches (1624 mm) Depth: 28.2 inches (717 mm) Height: 46.5 inches (1181 mm), including stand Weight Stylus Pro 7600: 96 lb (43.5 kg) without ink cartridges or stand Stylus Pro 9600: 185 lb (84 kg) without ink cartridges or stand Environmental Temperature Operation: 50 to 95 °F (10 to 35 °C) Storage: -4 to 104 °F (-20 to 40 °C) 1 month at 104 °F (40 °C) Transit -4 to 140 °F (-20 to 60 °C), stored in shipping container 120 hours at 140 °F (60 °C) Humidity (without condensation) Operation: 20 to 80% RH Storage: 20 to 85% RH Transit 5 to 85% RH (stored in shipping container) Paper The allowable paper dimensions are shown below: Roll paper Cut sheets Size 8.3 to 44.0 in. wide (Stylus Pro 9600) (210 to 1118 mm) 8.5 × 11 in. up to 44 in. wide Size 8.3 to 24.0 in. wide (Stylus Pro 7600) (210 to 610 mm) 8.5 × 11 in. up to 24 in. wide Maximum external roll diameter 2 in. core: 4 in. (103 mm) - 3 in. core: 6 in. (150 mm) Thickness 3.15 to 19.7 mil (0.8 to 0.5 mm) 3.15 to 59 mil (0.8 to 1.5 mm) Notes: ❏ Poor quality paper may reduce print quality and cause paper jams and other problems. If you encounter problems, switch to a higher grade of paper. ❏ Do not use curled, folded, or deckle-edge paper. ❏ Depending on the media, best feed and print quality are guaranteed on EPSON paper with thicknesses of 3.15 to 4.33 mil (0.08 to 0.11 mm), 64 to 90 gsm. ❏ For best results, use paper under the following conditions: Temperature: 59 to 77 °F (15 to 25 °C) Humidity: 40 to 60% RH BorderFree™ (marginless) printing is available in the following paper widths: ❏ 8 to 8.5 inches ❏ 10 inches ❏ 12 inches ❏ 14 inches ❏ 16 inches ❏ 20 inches ❏ 24 inches ❏ 36 inches (Stylus Pro 9600 only) ❏ 44 inches (Stylus Pro 9600 only) When printing BorderFree, set the image size in your application to be approximately 3 mm (1/8 inch) larger than the intended size of your printed image. Safety Approvals Safety standards UL 1950, CSA C22.2 No. 950 FDA EMC FCC part 15 subpart B, class B, CSA C108.8 class B 3 - EPSON Stylus Pro 7600 and 9600 7/02