Epson Stylus Pro 9880 ColorBurst Edition User's Guide - Page 174
Solving Paper Problems, sensors may not operate correctly.
View all Epson Stylus Pro 9880 ColorBurst Edition manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 174 highlights
174 | Solving Problems Problem Printing is too slow. Solution ◗ Turn on the High Speed setting. ◗ Choose a lower resolution in your printer software for faster printing. ◗ Clear space on your hard drive or run a defragmentation utility. ◗ Don't run too many applications at the same time. ◗ Turn off virtual memory. ◗ Add RAM to your system. ◗ Consider upgrading your system to support USB 2.0. Solving Paper Problems If paper feed or paper jam problems occur frequently, try one or more of the following solutions: • For roll paper, try adjusting the Paper Suction setting. See page 74 for more information. You can also adjust this setting through your printer driver. • For heavy or thick media, follow the instructions on page 65 to load the media correctly. • Make sure the paper is not folded, wrinkled, or damp. • Make sure the printer's environment falls within the required temperature and humidity range. • Make sure the paper is not too thick or too thin. See page 45, page 182, and page 184 for paper specifications. • Make sure no foreign objects are inside the paper path. • Make sure the printer isn't located in a brightly lit area. The paper sensors may not operate correctly. • Make sure the Media Type and Paper Source settings in the printer software are correct. • Make sure the PLATEN GAP setting is correct for the paper or media you're printing on. See page 68 for more information. • If you're not using Epson media, use a paper configuration to adjust for the paper's thickness and drying time; see page 74. 174