Epson SureColor F6070 Network Guide - Page 9
About the Software
View all Epson SureColor F6070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Large format inkjet printers (Models that do not support 1000 Mbps communication) Status light Green Green Red Red Data light Yellow Yellow (Flashing) Yellow Yellow (Flashing) Network Status Ready (10 M link) Receiving packets (10 M link) Ready (100 M link) Receiving packets (100 M link) Large format inkjet printers (Models that support 1000 Mbps communication) Status light Red Red Green Green Data light Yellow Yellow (Flashing) Yellow Yellow (Flashing) Network Status Ready (100 M link) Receiving packets (100 M link) Ready (1000 M link) Receiving packets (1000 M link) Network connector RJ-45 connector: This connector is used to connect an Ethernet cable to a network. You can use this cable for 10Base-T, 100Base-TX, and 1000Base-T Ethernet. Important: You must use the following shielded twisted-pair cable to connect the network interface to a network. O Category-5 or higher for the 10Base-T or 100Base-TX connection O Category-6 or higher for the 1000Base-T connection About the Software The Software Disc provided with your printer includes the following network software. Note: The software provided varies depending on your printer model. Introduction 9