Epson SureColor F6370 Users Guide - Page 112

Error messages Solution Paper Size Error Loaded paper is not supported size. Press the OK button and remove the currently loaded media. Be sure the media is at least 10 inches (254 mm) wide. If this message appears even when the media is the correct width, turn off the Paper Size Check setting and try printing again. Maintenance Request Replace Part Now/Replace Part Soon XXXXXXXXXX The product part indicated is nearing or at the end of its service life. Contact Epson for support and provide them with the service code shown on the LCD screen. You must replace the part before printing again. If you continue to print, a call for service occurs. Call For Service A call for service occurs when: XXXX Error XXXX • The power cable is not connected securely Power off and then on. If • An error occurs that cannot be cleared this doesn't work, note the code and call for service. When a call for service has occurred, the product automatically stops printing. Turn off the product, disconnect the power cable from both the outlet and the product, and then reconnect them. Turn the product on and off several times. If the same call for service is displayed on the LCD screen, contact Epson for support and provide them with the service code shown on the LCD screen. Parent topic: Solving Problems Related references Setup Menu Settings Where to Get Help Related tasks Replacing the Waste Ink Bottle Replacing the Chip Unit and Refilling Ink Cutting Media Attaching the Take-up Roll Core to the Auto Take-up Reel Related topics Replacing the Ink and Chip Unit 112