Epson SureColor F6370 Users Guide - Page 33

Media Feed Adjustment, Adjusting the Media Feed

Get Epson SureColor F6370 PDF manuals and user guides View all Epson SureColor F6370 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 33 highlights

5 Media width 10 to 44 inches (254 to 1118 mm); if Paper Size Check is off, the product assumes this is 44 inches (1118 mm) regardless of the actual width. 1 The configured margin and the actual print results may differ depending on the RIP software you use. Contact the RIP manufacturer for more information. 2 Depending on the RIP software, you may be able to use it to set these margins. Contact the RIP manufacturer for more information. 3 If the total of the print data width and left and right margins exceeds the printable area, a portion of the print data will not print. Parent topic: Media Handling Related references Paper Menu Settings Setup Menu Settings Media Feed Adjustment If your printouts contain horizontal banding, uneven tint, or stripes, you need to adjust the feed of the media. You do this by printing and examining a test pattern, and then selecting the feed adjustments you need. Adjust the feed using the same media type and print conditions you use for printing. For example, if you are using the auto take-up reel, you should use it during feed adjustment. You may need to adjust the feed again if you load media of a different width, change the feeding or take-up tension, or adjust the suction. Before adjusting the feed, make sure you have correctly loaded the media you plan to print on and selected all the options you plan to use for printing. Note: You can also adjust the feed during printing without printing a test pattern. Adjusting the Media Feed Adjusting the Media Feed During Printing Parent topic: Media Handling Adjusting the Media Feed You can perform a manual feed adjustment from the product control panel. 33

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
33
5
Media width
10 to 44 inches (254 to 1118 mm); if
Paper Size Check
is off, the product assumes this is
44 inches (1118 mm) regardless of the actual width.
1
The configured margin and the actual print results may differ depending on the RIP software you use.
Contact the RIP manufacturer for more information.
2
Depending on the RIP software, you may be able to use it to set these margins. Contact the RIP
manufacturer for more information.
3
If the total of the print data width and left and right margins exceeds the printable area, a portion of the
print data will not print.
Parent topic:
Media Handling
Related references
Paper Menu Settings
Setup Menu Settings
Media Feed Adjustment
If your printouts contain horizontal banding, uneven tint, or stripes, you need to adjust the feed of the
media. You do this by printing and examining a test pattern, and then selecting the feed adjustments you
need.
Adjust the feed using the same media type and print conditions you use for printing. For example, if you
are using the auto take-up reel, you should use it during feed adjustment. You may need to adjust the
feed again if you load media of a different width, change the feeding or take-up tension, or adjust the
suction.
Before adjusting the feed, make sure you have correctly loaded the media you plan to print on and
selected all the options you plan to use for printing.
Note:
You can also adjust the feed during printing without printing a test pattern.
Adjusting the Media Feed
Adjusting the Media Feed During Printing
Parent topic:
Media Handling
Adjusting the Media Feed
You can perform a manual feed adjustment from the product control panel.