Epson SureColor F7200 Network Guide - Page 31
Troubleshooting
View all Epson SureColor F7200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Troubleshooting General Problems Cannot configure the network interface or cannot print from the network. Cause The printer settings or network settings may be wrong. What to do First, check to see if you can print a status sheet, as described in "Printing a Network Status Sheet (Large Format Inkjet Printers)" on page 33. If you can print a status sheet, check the network settings; otherwise, set the interface mode of the printer's control panel to Auto or Option. Cannot print even if you have assigned the IP address to the computer and the printer. Cause You have assigned an IP address to the computer manually, but you assigned the IP address to the printer by Automatic Private IP Addressing (APIPA). What to do Assign the printer's IP address so that it belongs to the same segment as the computer. Use EpsonNet Config and the printer's control panel. Unable to start EpsonNet Config. Cause You have added or deleted protocols after installing EpsonNet Config. What to do Uninstall EpsonNet Config and then reinstall it. See "Installing EpsonNet Config" on page 26. Troubleshooting 31