Epson SureColor F9370 Users Guide - Page 153
LCD screen message, Solution, Roll Type, Parent topic, Related references, Related tasks
View all Epson SureColor F9370 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 153 highlights
LCD screen message Solution Roll Type Error Release and then reset the media loading lever, then match Roll Type setting to actual media. Make sure the Roll Type setting is correct for the loaded media. Follow the on-screen instructions to clear the error. Refer to manual and perform regular cleaning. You have not peformed regular cleaning for one month. If you do not clean the print head, nozzle clogs or print head damage may occur. Maintenance Request Replace Part Now/Replace Part Soon XXXXXXXXXX The indicated product part is nearing or at the end of its service life. Contact Epson for support and provide them with the service code shown on the LCD screen. You must replace the part before printing again. If you continue to print, a call for service occurs. Call For Service A call for service occurs when: XXX Error XXX • The power cable is not connected securely Power off and then on. If • An error occurs that cannot be cleared this doesn't work, note the code and call for service. When a call for service has occurred, the printer automatically stops printing. Turn off the printer, disconnect the power cable from both the outlet and the printer, and then reconnect them. Turn the printer on and off several times. If the same call for service is displayed on the LCD screen, contact Epson for support and provide them with the service code shown on the LCD screen. Parent topic: Solving Problems Related references Where to Get Help Environmental Specifications Media Setup Menu Settings Printer Setup Menu Settings Related tasks Replacing the Waste Ink Bottle Replacing the Chip Unit and Refilling Ink Cleaning the Print Head 153