Epson SureColor P5370 Standard Edition Users Guide - Page 203

Efficient Ethernet to Off., Contact Epson Support.

Page 203 highlights

LCD screen message Condition/solution Communication between the network and the printer is unstable. See the links below or contact your network administrator for more details. You may be able to resolve this by setting IEEE802.3az (Energy Efficient Ethernet) to "Off". See your documentation for details. The initial password is the product's serial number. See the link below for more details. Please check the serial number. For more details, please refer to the user manual. The initial password is provided on the label attached to the product. For more details, please refer to the user manual. Recovery Mode The printer restarted in recovery mode because the firmware update failed. Make sure you downloaded the latest firmware from the Epson website and that the computer and printer are connected via USB. Then try updating the firmware again. A printer part needs to be A part used in the printer is nearing the end of its service life. Contact replaced Epson for support and provide them with the displayed maintenance Contact Epson Support. For details, see your documentation. request code. The error persists until you replace the requested part. If you continue to use the printer, a printer error will occur. XXXXXXXX (maintenance request code) 203

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250

203
LCD screen message
Condition/solution
Communication between the
network and the printer is
unstable.
You may be able to resolve this
by setting IEEE802.3az (Energy
Efficient Ethernet) to "Off".
See your documentation for
details.
See the links below or contact your network administrator for more
details.
The initial password is the
product's serial number.
Please check the serial number.
For more details, please refer to
the user manual.
See the link below for more details.
The initial password is provided
on the label attached to the
product.
For more details, please refer to
the user manual.
Recovery Mode
The printer restarted in recovery mode because the firmware update
failed. Make sure you downloaded the latest firmware from the
Epson website and that the computer and printer are connected via
USB. Then try updating the firmware again.
A printer part needs to be
replaced
Contact Epson Support. For
details, see your documentation.
XXXXXXXX
(maintenance request code)
A part used in the printer is nearing the end of its service life. Contact
Epson for support and provide them with the displayed maintenance
request code. The error persists until you replace the requested part.
If you continue to use the printer, a printer error will occur.