Epson SureColor P7000 Commercial Edition User Manual - Page 52
IPsec/Access Control > Group Policy, Refusing Access from Unauthorized Clients
View all Epson SureColor P7000 Commercial Edition manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Option IPsec/Access Control Default Policy > Access Control Setting Enable Access Refuse Print Client Settings Separate IPsec/Access Control > Group Policy settings must be created for each of the Service Name > RAW (Port 9100), ENPC, 1 and SNMP options as shown in the example below. Group policies are applied in order from Group Policy 1. Option Group Policy n (n = 1-10) Access Control Remote Address (Host) 2 Method of Choose Port Service Name Setting RAW (Port 9100) Enable ENPC SNMP Access Permission Enter the print client IP address (prefix length can be used to specify range if desired). Example (IPv4): 192.168.0.0/24 Service Name RAW (Port 9100) ENPC SNMP 1. An Epson protocol used by Epson printer and scanner drivers and such applications as EpsonNet Config to find the printer. 2. A static IP address is recommended. If DHCP or "obtain automatically" (IPv6) is selected, the connection may terminate when the lease or address expires. Note: Select TCP or UDP for Protocol when Local Port is selected for Method of Choose Port > Port Number. Sample 3 Open the Setup tab in Remote Manager and configure Security > IPsec/Access Control > Group Policy settings for each client. Refusing Access from Unauthorized Clients Open the Setup tab in Remote Manager and configure Security > IPsec/Access Control > Default Policy settings as follows: Option IPsec/Access Control Setting Enable Tips for Administrator 52