Epson SureColor P800 Screen Print Edition Screen Print Setup Sheet - Page 3

Configuring the printer driver If you use the Epson printer driver instead of the AccuRIP software, you need to make some adjustments to the driver settings. (The AccuRIP software is pre-configured to work with Screen Positive film.) Option Recommended setting Media Type SureColor P800: Photo Paper > Premium Luster SureColor T3270: Photo Paper > Premium Luster Photo Paper (260) Ink SureColor P800: Photo Black Ink SureColor T3270: Photo Black (automatically determined) Color (SureColor P800) B&W Mode (SureColor P800) Off (No Color Management) Print Mode (SureColor T3270) Color/B&W Photo Color Mode (SureColor T3270) Off (No Color Management) Output Resolution 2880 × 1440 (Max Quality / Level 5) MicroWeave On High Speed Off (deselected) Color Density SureColor P800: +15 SureColor T3270: +50 Drying Time 0 Paper Feed Adjust 0* Paper Thickness 1 Platen Gap SureColor P800: Standard SureColor T3270: Auto Roll Paper Back Tension SureColor P800: N/A SureColor T3270: Auto Send 16-bit Data (OS X only) Off (deselected) *SureColor T3270: To ensure optimal quality and registration between film sets, it is recommended that you perform a manual paper feed adjustment on the printer control panel when using Epson Screen Positive Film for the first time. Ordering additional film You can order additional rolls or sheets of Epson Screen Positive film from www.epsonstore.com. Epson Screen Positive Film (5 mil) 17" × 100' roll 24" × 100' roll 8.5 × 11-inch sheets (100 pack) 13 × 19-inch sheets (100 pack) Part number S450132 S450133 S450135 S450136