Epson SureColor S60600 User Manual

Epson SureColor S60600 Manual

Epson SureColor S60600 manual content summary:

  • Epson SureColor S60600 | User Manual - Page 1
    Epson® SureColor® S40600/S60600 User's Guide
  • Epson SureColor S60600 | User Manual - Page 2
  • Epson SureColor S60600 | User Manual - Page 3
    Contents SureColor S40600/S60600 User's Guide 7 Introduction to Your Printer...8 Notations Used in the Documentation 8 Printer Part Locations...8 Product Parts - Front ...9 Product Parts - Right Side ...10 Product Parts - Inside ...11 Product Parts - Back...12 Control Panel...13 Consumables and
  • Epson SureColor S60600 | User Manual - Page 4
    Accessing the Printer's Menus ...60 Media Setup Menu Settings ...60 Printer Setup Menu Settings ...61 Maintenance Menu Settings...63 Printer Status Menu Heater and Media Edge Plates 72 Perform Regular Cleaning...74 Using Ink Cleaner ...74 Moving the Print Head for Maintenance 75 Cleaning Around
  • Epson SureColor S60600 | User Manual - Page 5
    the Administrator Password 123 Red Light Shines Inside the Printer 123 Solving Printing Problems ...124 Nothing Prints ...124 Cannot Print Over a Ink Cartridge Specifications...135 Media Specifications ...135 Safety and Approvals Specifications 136 Notices ...137 Important Safety Instructions
  • Epson SureColor S60600 | User Manual - Page 6
    Ink Cartridge Safety Instructions 139 FCC Compliance Statement...140 Software License Terms...141 Trademarks ...148 Copyright Notice...149 A Note Concerning Responsible Use of Copyrighted Materials 149 Copyright Attribution ...149 6
  • Epson SureColor S60600 | User Manual - Page 7
    SureColor S40600/S60600 User's Guide Welcome to the SureColor S40600/S60600 User's Guide. For a printable PDF copy of this guide, click here. 7
  • Epson SureColor S60600 | User Manual - Page 8
    Refer to these sections to learn more about your printer and this manual. Notations Used in the Documentation Printer Part Locations Consumables and Replacement Parts Printer Usage Guidelines Notations Used in the Documentation Follow the guidelines in these notations as you read your documentation
  • Epson SureColor S60600 | User Manual - Page 9
    maintenance cover 2 Print drying system (included with SC-S60600 and optional for SC-S40600) 3 After heater 4 Tension bar 5 Takeup reel roll core holder 6 Takeup roll support 7 Auto switch 8 Manual switch 9 Ink cartridges (one set for SC-S40600) 10 ink cartridge lock levers 11 Cartridge check light
  • Epson SureColor S60600 | User Manual - Page 10
    15 Control panel 16 Air filters 17 Front cover Parent topic: Printer Part Locations Product Parts - Right Side 1 Airflow vents 2 Waste ink tube 3 Waste ink bottle 10
  • Epson SureColor S60600 | User Manual - Page 11
    4 Casters 5 Stand fixing screws 6 AC inlets 7 LAN port 8 Data light 9 Status light 10 USB port Parent topic: Printer Part Locations Product Parts - Inside 1 Print head 2 Media edge plates 3 Cutter groove 4 Pressure rollers 5 Platen heater 11
  • Epson SureColor S60600 | User Manual - Page 12
    6 Caps 7 Wiper unit 8 Flushing pad Parent topic: Printer Part Locations Product Parts - Back 1 Drive switch 2 Roll holder 3 Level gauge 4 Lift lever 5 Pre-heater 6 Roll support 7 Handle Parent topic: Printer Part Locations 12
  • Epson SureColor S60600 | User Manual - Page 13
    Control Panel 1 The power button 2 The power light 3 The media setup button 4 LCD screen 5 The Menu button 6 The back button 7 The left and right arrow buttons 8 The up and down arrow buttons 9 The OK button 10 The heat/dry menu button 13
  • Epson SureColor S60600 | User Manual - Page 14
    11 The 12 The 13 The maintenance button pause/cancel button light button LCD Screen Display 1 Printer status and error messages 2 Heater temperature status : Heater is at the selected temperature : Heater has not yet reached the selected temperature 3 Feed adjustment information, if
  • Epson SureColor S60600 | User Manual - Page 15
    you have a replacement ink cartridge handy : Ink cartridge is expended; replace the ink cartridge : Ink cartridge is not latched; lower the lock lever : No ink cartridge installed; insert an ink cartridge and lower the lock lever : An error occurred; follow the instructions on the LCD screen
  • Epson SureColor S60600 | User Manual - Page 16
    of the print drying system (optional for SC-S40600) No icon: Print drying system not installed or installed incorrectly : Drying fan is on : Drying fan is off Parent topic: Printer Part Locations Consumables and Replacement Parts You can purchase genuine Epson ink, paper, and accessories from an
  • Epson SureColor S60600 | User Manual - Page 17
    ink bottle Cleaning sticks Clean room wiper (not available in some countries) Print drying system (optional for the SC-S40600) Media edge guide Part number T890400 T696000 C13S210044 T699300 C13T724000 C13S090013 C13S090016 C12C932381 C12C932411 Parent topic: Introduction to Your Printer Printer
  • Epson SureColor S60600 | User Manual - Page 18
    the print head. • Do not bend or pull the waste ink tube. Otherwise ink may leak inside or outside the printer. • Be sure that the waste ink bottle is installed whenever the printer is turned on. • If an error occurs and the printer is turned off without first resolving the error, the print head
  • Epson SureColor S60600 | User Manual - Page 19
    cartridges into all the slots on the printer or the printer cannot print. • Do not leave the printer without cartridges installed in all the slots, even when the printer is not in use. The ink in the printer may dry out, preventing it from printing as expected. • The IC chip on each cartridge stores
  • Epson SureColor S60600 | User Manual - Page 20
    your hands from causing print quality problems. • When handling media, hold it or scratch the printed surface to avoid removing the ink. • Dry printed media completely before folding or stacking instructed in the media documentation. • When you are not printing on media, remove it from the printer
  • Epson SureColor S60600 | User Manual - Page 21
    clogged if fine dust gets on the print head, and you may not be able to print properly. • Store the printer on a level surface; do not store it on angle, on its end, or upside down. Parent topic: Printer Usage Guidelines Related references Where to Get Help Related tasks Cutting Media 21
  • Epson SureColor S60600 | User Manual - Page 22
    media on your product. Media Handling Precautions Loading Media Saving New Media Settings Viewing and Changing Media Settings Printable Area and Media Size Checking Printing the Amount of Media Remaining Cutting Media Using the Auto Take-up Reel Media Handling Precautions Follow these guidelines as
  • Epson SureColor S60600 | User Manual - Page 23
    media if the edges are uneven on the roll; this could cause feeding problems. Rewind the media on the roll or use a different roll. Parent topic: Media Handling Loading Media Before loading media in your printer, review and follow the media handling guidelines for the best results. Caution: Wait
  • Epson SureColor S60600 | User Manual - Page 24
    2. Open the front cover and raise the media loading lever. 3. Grasp the tabs on the media holding plates and slide them out of the way. 24
  • Epson SureColor S60600 | User Manual - Page 25
    is not visible, rotate the handle forward until it stops or the media cannot load properly. 5. Slide the left roll holder to the media core size you are loading. 25
  • Epson SureColor S60600 | User Manual - Page 26
    6. Fully tighten the knob on the left roll holder. 7. Place your media on the roll supports. Note: Load the roll based on the printable side. Printable side out 26
  • Epson SureColor S60600 | User Manual - Page 27
    Printable side in 8. On the left side of the product, raise the lift lever to lift the media into position. 27
  • Epson SureColor S60600 | User Manual - Page 28
    9. Firmly insert the roll media onto the left roll holder. Note: If the outer diameter of the roll media is less than 5.5 inches (140 mm), you need to manually lift the roll media onto the roll holder. 10. On the right side of the product, raise the lift lever to lift the media into position. 28
  • Epson SureColor S60600 | User Manual - Page 29
    11. Push the right roll holder into the roll media. 29
  • Epson SureColor S60600 | User Manual - Page 30
    12. Push the center of the roll holder twice to securely insert it into the roll core. Note: Make sure the roll holder is fully inserted into the roll core or media may not feed correctly and slip during printing, or cause banding in your printouts. 30
  • Epson SureColor S60600 | User Manual - Page 31
    13. Fully tighten the knob on the roll holder. 31
  • Epson SureColor S60600 | User Manual - Page 32
    14. Rotate the handle shown here until part A is hidden from view, then stop turning the handle. 32
  • Epson SureColor S60600 | User Manual - Page 33
    15. Insert your media approximately 12 inches (30 cm) into the opening shown here and lower the media loading lever. 16. At the front of the printer, hold the media in the center and raise the media loading lever. 33
  • Epson SureColor S60600 | User Manual - Page 34
    17. Pull the media straight out until it is aligned with the bottom edge of the label on the after heater. Note: Do not use two hands to pull the media to avoid skewing its position. 34
  • Epson SureColor S60600 | User Manual - Page 35
    18. Lower the media loading lever to hold the media in place. 19. Lightly tap both ends of the media and check if there is a difference in tension between the left and right sides. If there is a difference in tension, raise the media loading lever, adjust the looseness of the media, and lower the
  • Epson SureColor S60600 | User Manual - Page 36
    20. Slide the media edge plates against the media and adjust them so that the round holes shown here are centered over the edges of the media. Caution: If your media is more than 0.02 inch (0.4 mm) thick, leave the media holding plates on the sides of the product or they could damage the print head.
  • Epson SureColor S60600 | User Manual - Page 37
    the product to automatically perform feed adjustment and head alignment, select Auto, press the OK button, and skip the remaining steps. • If you want to manually perform feed adjustment and head alignment, select Manual, press the OK button, and continue with the next step. 37
  • Epson SureColor S60600 | User Manual - Page 38
    8. After the adjustment pattern prints, check the pattern for group A and B and identify the pattern with the least amount of overlap or gap for each group. Note: If you cannot decide between two patterns, select a value halfway between the two patterns. For example, select -0.05% if your adjustment
  • Epson SureColor S60600 | User Manual - Page 39
    11. Check the printed patterns and identify the pattern with the least amount of gap between the lines in each group. 12. Press the up or down arrow button to select the value you identified in the previous step and press the OK button. Repeat for each group. Parent topic: Media Handling Related
  • Epson SureColor S60600 | User Manual - Page 40
    1. Press the up or down button to select the media setting number for the media you loaded and press the OK button. 2. Press the up or down button to select the roll type you loaded and press the OK button. 40
  • Epson SureColor S60600 | User Manual - Page 41
    long as the media holding plates are attached correctly. • When the Media Size Check setting is turned off, your product uses the longest scale on the : If you turn off the Media Size Check setting, printing may occur outside the edges of your media, causing ink to stain the product. Make sure
  • Epson SureColor S60600 | User Manual - Page 42
    media width. When you load media to the left of the right side reference position, adjust the Print Start Position setting on the product control panel to match the position where the media is loaded. 1 Bottom margin1 You can configure this margin in the RIP software from 0.2 inch (5 mm) to 0.7 inch
  • Epson SureColor S60600 | User Manual - Page 43
    5 Media width 11.8 to 64 inches (300 mm to 1626 mm); if Media Size Check is off, the product assumes this is 64 inches (1626 mm) regardless of print data will not print. Parent topic: Media Handling Related references Printer Setup Menu Settings Printing the Amount of Media Remaining After you
  • Epson SureColor S60600 | User Manual - Page 44
    4. Press the OK button to print the amount of media remaining. Parent topic: Media Handling Related references Media Setup Menu Settings Cutting Media When you finish printing, use a commercially available cutter to cut the media. Warning: Be careful not to cut yourself when using cutters or other
  • Epson SureColor S60600 | User Manual - Page 45
    2. Select Feed To Cut Position and press the OK button. The printer feeds the media to the cutting position (cutter groove). Note: If you printed the amount of media remaining onto your media, press the up arrow
  • Epson SureColor S60600 | User Manual - Page 46
    3. If you are using the auto take-up reel, raise the tension bar. 4. Use your cutting tool to cut the media along the cutting groove. Warning: Do not place your fingers in the path of the cutting tool to avoid injuring yourself. 46
  • Epson SureColor S60600 | User Manual - Page 47
    loading steps to remove the media from the product. • If you are using the auto take-up reel, go to the next step. 6. Use the Manual switch shown here to take up the cut media onto the take-up reel, depending on the printable side of the media: • Move the switch
  • Epson SureColor S60600 | User Manual - Page 48
    Take Up with the Printable-Side-In Take Up with the Printable-Side-Out Removing Media from the Auto Take-up Reel Parent topic: Media Handling About the Auto Take-up Reel The auto take-up reel automatically rolls up printed media as you print. You can use the auto take-up reel for media with the
  • Epson SureColor S60600 | User Manual - Page 49
    1. Press and hold the down arrow button until the edge of the loaded media reaches the center of the after heater. Note: Always press the down arrow button to feed media. If you pull the media with your hand, it may twist during take-up. 49
  • Epson SureColor S60600 | User Manual - Page 50
    2. Loosen the roll core holder knobs and slide the core holders apart. Then center the roll supports between the roll core holders. 3. Align the right roll core holder with the right edge of the media and tighten the knob. 50
  • Epson SureColor S60600 | User Manual - Page 51
    4. Insert the roll core into the right roll core holder. 5. Push the left roll holder until part A is fully inserted into the roll core, then tighten the knob. Caution: Once part A is hidden, do not push the roll holder any further or you may damage the roll core holder. 51
  • Epson SureColor S60600 | User Manual - Page 52
    6. Trim the left and right corners of the media, leaving a straight section at the center about 4 to 8 inches (10 to 20 cm) wide. 1 10 inches (25 cm) 2 4 to 8 inches (10 to 20 cm) Parent topic: Using the Auto Take-up Reel Take Up with the Printable-Side-In After attaching the roll core on the auto
  • Epson SureColor S60600 | User Manual - Page 53
    1. Cut a strip about 27.6 inches (70 cm) long from the included paper tape and attach one end to the center of the media using adhesive tape. 1 27 inches (70 cm) Note: You can also use commercially available tape or strips cut from media to attach your media to the roll core. The paper tape or cut
  • Epson SureColor S60600 | User Manual - Page 54
    3. Set the Auto switch to the position. 4. Lower the tension bar until it lightly touches the paper tape. 54
  • Epson SureColor S60600 | User Manual - Page 55
    Note: Make sure the media is taut; otherwise it may not be taken up correctly. Parent topic: Using the Auto Take-up Reel Take Up with the Printable-Side-Out After attaching the roll core on the auto take-up reel, follow these steps to take up media with the printable side out. 1. Cut a strip about
  • Epson SureColor S60600 | User Manual - Page 56
    2. Pull the other end of the tape straight down and attach it to the roll core using adhesive tape as shown. 56
  • Epson SureColor S60600 | User Manual - Page 57
    3. Set the Auto switch to the position. 4. Lower the tension bar until it lightly touches the paper tape. 57
  • Epson SureColor S60600 | User Manual - Page 58
    Removing Media from the Auto Take-up Reel After printing on media loaded on auto take-up reel, follow these steps to remove it. 1. While supporting the left side of the media roll, loosen the left roll core holder knob and remove the roll core holder from the roll. 2. Lower the
  • Epson SureColor S60600 | User Manual - Page 59
    3. While supporting the right side of the media roll, loosen the right roll core holder knob and remove the roll core holder from the roll. 4. Lower the media roll onto the roll support. Parent topic: Using the Auto Take-up Reel 59
  • Epson SureColor S60600 | User Manual - Page 60
    Using the Control Panel Menus Follow the instructions in these sections to access the printer menu system and select settings. Accessing the Printer's Menus Media Setup Menu Settings Printer Setup Menu Settings Maintenance Menu Settings Printer Status Menu Settings Other Settings Menu Settings
  • Epson SureColor S60600 | User Manual - Page 61
    Panel Menus Related tasks Loading Media Saving New Media Settings Printer Setup Menu Settings The Printer Setup menu lets you control margin settings, automatic cleaning cycles, and other aspects of your product's operation. Caution: Follow the instructions in the topic links below the table to use
  • Epson SureColor S60600 | User Manual - Page 62
    Setting Media Check Options Media Size Check Media End Check Media Skew Check Btw Pages Nozzle Check Lamp Setting Head Mode (SC-S60600 only) Sleep Mode Off Print Pattern Auto Nozzle Check Auto Manual 2 Heads Mode Head1 Head2 15 to 240 minutes Restore Settings Yes No Parent topic: Using the
  • Epson SureColor S60600 | User Manual - Page 63
    menu directly by pressing the maintenance button. Caution: Follow the instructions in the topic links below the table to use these Head Maintenance if the nozzles are still clogged. Select Replace Ink Bottle if you need to replace the ink bottle before a message appears telling you to replace it on
  • Epson SureColor S60600 | User Manual - Page 64
    Parts Performing Pre-storage Maintenance Applying Carriage Rod Grease Printer Status Menu Settings The Printer Status menu lets you track printer usage and firmware version. Setting Level Print Status Sheet Firmware Version Options Ink Waste ink bottle Wiper Unit Print - Description Displays the
  • Epson SureColor S60600 | User Manual - Page 65
    Off On Off Yes No Description Determines whether IP addresses are obtained automatically through DHCP or manually. Select Panel to enter an IP address, subnet mask, and default gateway address manually. Prints the current network status and settings. Returns all items in the Network Setup menu to
  • Epson SureColor S60600 | User Manual - Page 66
    See the instructions in these sections to maintain your printer for optimum results. When to Maintain Your Product Preparing for Maintenance Cleaning the Platen Heater and Media Edge Plates Perform Regular Cleaning Shaking and Replacing Ink Cartridges Replacing the Waste Ink Bottle Replacing
  • Epson SureColor S60600 | User Manual - Page 67
    Cleaning Schedule * SC-S40600: Right print head only Number 1 2 3 4 Area to clean Frequency Platen heater and media edge Daily plates Around the print head Around caps Once a month
  • Epson SureColor S60600 | User Manual - Page 68
    Consumables and Parts Replacement Schedule Number Part to replace 1 Air filters 2 Flushing pad 3 Wiper unit 4 Media edge plates 5 Waste ink bottle 6 Ink cartridge Frequency When you see a message on the LCD screen to replace the part If the plates are deformed or damaged When you see a
  • Epson SureColor S60600 | User Manual - Page 69
    Frequency When a clog is found after a nozzle check When you will turn off the printer and not use it for a long time (over a month) If dirt from the the Print Head Cleaning the Anti-drying Caps Replacing the Waste Ink Bottle Replacing the Maintenance Parts Replacing the Media Edge Plates
  • Epson SureColor S60600 | User Manual - Page 70
    the ink cleaner that came with your product to wipe ink stains. Metal tray Use the metal tray that came with your product to hold cleaning tools and consumables you remove from the product. Soft cloth Obtain a commercially available static-free, lint-free soft cloth to clean inside the printer. 70
  • Epson SureColor S60600 | User Manual - Page 71
    Grease Kit Use the grease kit that came with your product to apply grease to the carriage rods. Number 1 2 3 4 5 6 Part Gloves Grease tool Cleaning stick Pad A Pad B Grease Quantity 16 1 8 16 16 2 Parent topic: Preparing for Maintenance Maintenance Precautions Follow these precautions as you
  • Epson SureColor S60600 | User Manual - Page 72
    or using the ink cleaner. • Thoroughly wash the substance from your skin with soapy water. If your skin becomes irritated or discolored, contact a doctor. • Immediately rinse the substance from your eyes with water to avoid bloodshot eyes or mild inflammation. If you experience eye problems, contact
  • Epson SureColor S60600 | User Manual - Page 73
    particles, or lint on these surfaces could damage the print heads or clog the nozzles. • Do not use the ink cleaner to clean these parts. 1. Turn off the product, wait for the LCD screen to turn off, and unplug both power cables. If the optional
  • Epson SureColor S60600 | User Manual - Page 74
    to ensure the best print quality. If you see a message on the LCD to perform head maintenance, clean your product as soon as possible. Using Ink Cleaner Moving the Print Head for Maintenance Cleaning Around the Print Head Cleaning the Anti-drying Caps Parent topic: Maintenance Using
  • Epson SureColor S60600 | User Manual - Page 75
    to local disposal regulations. 1. Place the cup on a tray and pour approximately 0.3 ounce (10 ml) of ink cleaner into the cup. 2. Recap the ink cleaner bottle. 3. Dip a fresh cleaning stick into the ink cleaner and let any excess cleaning solution drip into the cup. Parent topic: Perform Regular
  • Epson SureColor S60600 | User Manual - Page 76
    head as described here. Do not move the print head manually or you may cause your product to malfunction. 1. When the Perform Regular Cleaning Cleaning Around the Print Head Clean around the print head to remove any ink, lint, or dust that could affect print quality. 1. Move the print head into the
  • Epson SureColor S60600 | User Manual - Page 77
    the areas shown here. Note: Use a wipe to remove any clots of ink that form after using a cleaning stick. 4. Dampen a new cleaning stick with ink cleaner and use it to clean the areas shown here. Note: Two print heads are shown here; the SC-S40600 comes with only the right print head. 77
  • Epson SureColor S60600 | User Manual - Page 78
    shown here. 6. Close the left maintenance cover. Parent topic: Perform Regular Cleaning Cleaning the Anti-drying Caps Clean the anti-drying caps to remove any ink that may affect print quality. 1. Open the right maintenance cover. 2. Dampen a new cleaning stick with
  • Epson SureColor S60600 | User Manual - Page 79
    3. Hold the cleaning stick flat against the top edges of the cap and wipe in the direction shown. Clean the top edges of each cap. 79
  • Epson SureColor S60600 | User Manual - Page 80
    Caution: Do not press too hard against the edges of the caps or touch the inner side of the caps to avoid damaging them and preventing the print head from capping correctly. 80
  • Epson SureColor S60600 | User Manual - Page 81
    4. Use the flat side of the cleaning stick to clean the outside of each cap. 81
  • Epson SureColor S60600 | User Manual - Page 82
    5. If the guides require cleaning, dampen a new cleaning stick with ink cleaner and use it to clean the areas shown. 82
  • Epson SureColor S60600 | User Manual - Page 83
    6. If a film of ink remains after cleaning with the cleaning stick, use tweezers to remove it. 83
  • Epson SureColor S60600 | User Manual - Page 84
    7. Remove any lint or dust from the inside of the caps using the tip of a cleaning stick or tweezers. 84
  • Epson SureColor S60600 | User Manual - Page 85
    Parent topic: Maintenance Related references Consumables and Replacement Parts Handling Ink and Cleaning Cartridges Ink Cartridge Safety Instructions Shaking the Ink Cartridges You must remove the ink cartridges installed in the product must and thoroughly shake them once every three weeks
  • Epson SureColor S60600 | User Manual - Page 86
    Replacing Ink Cartridges Related references Handling Ink and Cleaning Cartridges Ink Cartridge Safety Instructions Replacing the Ink Cartridges ink cartridges. You cannot print if any of the ink cartridges are expended or any ink slots are empty. Caution: Leave your old cartridges in the printer
  • Epson SureColor S60600 | User Manual - Page 87
    needs replacing. 3. Insert your finger into the depression on top of the ink cartridge and pull the cartridge straight out. Caution: Be careful handling the ink cartridge as there may be ink around the ink supply port. Warning: If ink gets on your skin, wash it thoroughly with soap and water. If
  • Epson SureColor S60600 | User Manual - Page 88
    4. Remove the new cartridge from the package. Then gently shake the cartridge for about 15 times within five seconds. Note: Do not touch the green chip on the cartridge. 5. Make sure the labels on the cartridge and product match, then insert the cartridge into the slot. 88
  • Epson SureColor S60600 | User Manual - Page 89
    Related references Consumables and Replacement Parts Handling Ink and Cleaning Cartridges Ink Cartridge Safety Instructions Replacing the Waste Ink Bottle When you see a message telling you to prepare an empty ink bottle on the LCD screen, the waste ink bottle is nearly full. Make sure you
  • Epson SureColor S60600 | User Manual - Page 90
    it from the holder. 2. Tightly seal the used waste ink tank bottle. 3. Insert the waste ink tube into the new waste ink bottle and place the bottle in the holder. Note: Be sure the waste ink tube is inserted in the waste ink bottle or waste ink could spill onto your product. Store the cap from
  • Epson SureColor S60600 | User Manual - Page 91
    Related references Consumables and Replacement Parts Handling Ink and Cleaning Cartridges Maintenance Precautions Maintenance Menu Settings Replacing the Maintenance Parts When press the OK button. 2. After the print head moves to the left side of the printer, open the right maintenance cover. 91
  • Epson SureColor S60600 | User Manual - Page 92
    3. Put on the gloves included with the printer. 4. Place your fingers in the groove on the back of the wiper unit and tilt it forward slightly. 5. Unwrap the new wiper unit. 92
  • Epson SureColor S60600 | User Manual - Page 93
    6. Grasp the sides of the wiper unit and pull it straight out. 7. Use the packaging from the new wiper unit to wrap the used wiper unit. 93
  • Epson SureColor S60600 | User Manual - Page 94
    8. Place the new wiper unit in the printer as shown and press it down until it clicks into place. 94
  • Epson SureColor S60600 | User Manual - Page 95
    9. Lift the tab on the bottom of the flushing pad, remove the flushing pad, and place it on the metal tray. Caution: Do not place the flushing pad on the product. 95
  • Epson SureColor S60600 | User Manual - Page 96
    10. Insert the new flushing pad into the slots on the product and press the tab down until it clicks into place. 11. Press the OK button. 12. Remove the new air filters from their packaging. 13. Grasp the installed air filters and lift them straight out of the product. 14. Use the packaging from the
  • Epson SureColor S60600 | User Manual - Page 97
    15. Insert the new air filters as shown. 16. Press OK button. 17. Close the maintenance cover and press the OK button. You see a confirmation screen. 18. Select Yes and press the OK button. Parent topic: Maintenance Related references Consumables and Replacement Parts Maintenance Precautions
  • Epson SureColor S60600 | User Manual - Page 98
    3. Wait for one minute, then open the left maintenance cover and the front cover. 4. Grasp the tabs on the media edge plates and slide them to the left edge of the platen. Caution: Do not remove the media edge plates on the right edge of the platen or they could drop into the product and cause it to
  • Epson SureColor S60600 | User Manual - Page 99
    5. Remove the left media edge plate, then remove the right media edge plate in the same manner. 99
  • Epson SureColor S60600 | User Manual - Page 100
    6. Align the white line on a new media edge plate with the edge of the platen. 100
  • Epson SureColor S60600 | User Manual - Page 101
    7. While pressing the tip of the media edge plate against the platen, attach the hooks to the front corner of the platen. 8. Confirm that the three hooked sections of the media edge plate are securely attached as shown here, with no gap between the plate and the platen. • The latch at the top (1)
  • Epson SureColor S60600 | User Manual - Page 102
    • The latch at the rear of the tab (3) should hook onto the front corner of the platen. Caution: If the media edge plates are not attached correctly, repeat these steps to reattach them or the print head may be damaged. 9. Repeat the previous steps to align and attach the other media edge plate,
  • Epson SureColor S60600 | User Manual - Page 103
    print quality. Perform the following maintenance as necessary: • Nozzle Check: Check for clogged nozzles before each print job or if you have not used the printer for an extended period of time. Inspect the printed check pattern and clean the print head if you notice faint or missing areas. • Head
  • Epson SureColor S60600 | User Manual - Page 104
    : • Set up the product to automatically print a check pattern. You can select how often the product performs a nozzle check in the Printer Setup menu. • Manually run a nozzle check from the product control panel, as described here. 1. Press the maintenance button. You see the Maintenance menu on the
  • Epson SureColor S60600 | User Manual - Page 105
    in the Customize Settings menu or the Auto Nozzle Check setting in the Printer Setup menu. You can select from three levels of head cleaning: • : If colors are faint or missing even after cleaning the print head, manually clean around the print head inside the product. 1. Press the maintenance button
  • Epson SureColor S60600 | User Manual - Page 106
    all rows of nozzles in the check pattern. Go to step 6. • Head1/Head2 (SC-S60600): Select this option when you see faint printing or gaps in only one of the print : Print Head Maintenance Related references Maintenance Precautions Printer Setup Menu Settings Maintenance Menu Settings Related tasks
  • Epson SureColor S60600 | User Manual - Page 107
    product again, turn it on and follow the on-screen instructions. Note: If you re-install used ink cartridges that are low on ink, you may need additional ink cartridges to finish charging the ink system. Parent topic: Maintenance Related references Maintenance Precautions Consumables and Replacement
  • Epson SureColor S60600 | User Manual - Page 108
    Cleaning the Pressure Rollers Clean the pressure rollers if they become dirty. If ink remains on the rollers, it could transfer to your printouts. 1. Turn off the product, wait for the LCD screen to turn off, and unplug both
  • Epson SureColor S60600 | User Manual - Page 109
    5. Use the cloth to clean the pressure rollers. Caution: Be sure not to touch the carriage rod (B) or an error may occur during printing. Parent topic: Maintenance Related references Maintenance Precautions 109
  • Epson SureColor S60600 | User Manual - Page 110
    Applying Carriage Rod Grease When you see the message Apply secondary carriage rod grease on the product control panel, you need to apply grease to carriage rods A and B using the grease and tools that came with your product. Use a new grease pad when applying grease to the carriage rods. 1. To
  • Epson SureColor S60600 | User Manual - Page 111
    6. Firmly insert the tab on pad A into the slot on the grease tool and rotate the pad onto the tool. 7. Open the front cover. 8. Hold the grease tool against the back of carriage rod A and smoothly slide it back and forth across the carriage rod to wipe off any stains. 9. Remove the stained pad from
  • Epson SureColor S60600 | User Manual - Page 112
    12. Fully submerge the tip of the cleaning stick into the grease, rotate the stick two or three times, and remove it from the grease. Then apply the grease to pad A on the end of the grease tool. 13. Hold the grease tool against the back of carriage rod A and smoothly slide it back and forth twice
  • Epson SureColor S60600 | User Manual - Page 113
    15. Hold pad B against the front of carriage rod B and smoothly slide it back and forth across the carriage rod twice to wipe off any stains. 113
  • Epson SureColor S60600 | User Manual - Page 114
    16. Fully submerge the tip of a cleaning stick into the grease, rotate the stick two or three times, and remove it from the grease. Then apply the grease to a new pad B. 114
  • Epson SureColor S60600 | User Manual - Page 115
    17. Hold pad B against the front of carriage rod B and smoothly slide it back and forth twice across the carriage rod to grease the rod. 18. Close the front cover and press the OK button on the product control panel. The carriage moves back and forth. 19. Remove the used pad A from the grease tool,
  • Epson SureColor S60600 | User Manual - Page 116
    contact Epson support. Prepare to Move the Product Setting Up the Product After Moving Prepare to Move the Product Do the following before moving the product: 1. Remove any loaded media from the media feeding unit and auto take-up reel. 2. Turn off the product. 3. Remove the waste ink
  • Epson SureColor S60600 | User Manual - Page 117
    tilt the product more than 10 degrees. Parent topic: Moving or Transporting the Product Related references Maintenance Precautions Related tasks Replacing the Waste Ink Bottle Cutting Media Setting Up the Product After Moving Follow these steps to set up the product after moving it. 1. Verify that
  • Epson SureColor S60600 | User Manual - Page 118
    3. Connect the power cables to an electrical outlet and turn on the printer. 4. Load media in the product. 5. Perform a nozzle check and confirm that there are no clogged concepts Print Head Maintenance Related references Maintenance Precautions Related tasks Replacing the Waste Ink Bottle 118
  • Epson SureColor S60600 | User Manual - Page 119
    Printer Problems Solving Printing Problems Solving Print Quality Problems Where to Get Help Product Status Messages You can often diagnose problems hours before installing it. Ink cartridge cannot be detected. Insert again or replace ink cartridge. Ink Cartridge Error Replace cleaning cartridge
  • Epson SureColor S60600 | User Manual - Page 120
    printer. Turn off the product, wait a few minutes, and turn it on again. Then reinstall the firmware again. If this message persists, contact Epson for support. Print head is nearing end of service the auto take-up reel. Media Size Error Load correct size media. Raise the media loading lever and
  • Epson SureColor S60600 | User Manual - Page 121
    2.5 • The printer is exposed to manually. Make sure the Roll Type setting matches the loaded roll type. This message is displayed when regular cleaning has not been performed for more than one month. The product part indicated is nearing or at the end of its service life. Contact Epson for support
  • Epson SureColor S60600 | User Manual - Page 122
    , and then reconnect them. Turn the printer on and off several times. If the same call for service is displayed on the LCD screen, contact Epson for support and provide them with the service code shown on the LCD screen. Parent topic: Solving Problems Related concepts Print Head Maintenance Related
  • Epson SureColor S60600 | User Manual - Page 123
    topic: Solving Printer Problems Related references Printer Setup Menu Settings Forgot the Administrator Password If you forgot the administrator password you created during network setup, contact Epson for support. Parent topic: Solving Printer Problems Red Light Shines Inside the Printer The red
  • Epson SureColor S60600 | User Manual - Page 124
    topic: Solving Problems Nothing Prints If you have sent a print job and nothing prints, try these solutions: • Make sure your printer is turned on , set the IP address manually. • Check your wired LAN router or access point to see if the LED for the port to which your printer is connected is on or
  • Epson SureColor S60600 | User Manual - Page 125
    setting is set to On. For best results, leave this setting turned on. Parent topic: Solving Printing Problems Related references Printer Setup Menu Settings Removing Jammed Media If media jams in the printer, check the following: • Make sure the media is not curled, creased, or folded on the leading
  • Epson SureColor S60600 | User Manual - Page 126
    2. Open the front cover. 3. Grasp the tabs on the media holding plates and slide them to the left and right sides. Caution: If the media holding plates are deformed or damaged, do not continue to use them or you could damage the pressure rollers or print heads. Replace the media holding plates
  • Epson SureColor S60600 | User Manual - Page 127
    . 6. Pull the media to the cutter groove and cut off the torn or creased media from the roll. 7. Manually rewind the media. 8. Remove any media that remains inside the product. 9. Turn the product back on, load media the product may not print properly. Parent topic: Solving Printing Problems 127
  • Epson SureColor S60600 | User Manual - Page 128
    not been used for a long time, nozzles may be dried and clogged. Turn the printer on at least once every two weeks to prevent the nozzles from clogging. Parent topic: Solving Print Quality Problems Related tasks Checking for Clogged Print Head Nozzles Cleaning the Print Head Nozzles Overall Print
  • Epson SureColor S60600 | User Manual - Page 129
    for the media. For the most accurate adjustment, print a test pattern using the Manual > 500mm Pattern setting. The same media in a different width may require different adjustment values. • Use genuine Epson ink cartridges and make sure the cartridges have not expired. • Raise the temperature of
  • Epson SureColor S60600 | User Manual - Page 130
    you have your printer serial number and proof of purchase. Visit Epson's U.S. support website or Canadian website and select your product for solutions to common problems. You can download drivers, firmware, and documentation, get FAQs and troubleshooting advice, or e-mail Epson with your questions
  • Epson SureColor S60600 | User Manual - Page 131
    information on how to return your Epson products for proper disposal. Windows System Requirements Printing Specifications Electrical Specifications Environmental Specifications Dimension Specifications Interface Specifications Ink Cartridge Specifications Media Specifications Safety and Approvals
  • Epson SureColor S60600 | User Manual - Page 132
    at epson.com/support (U.S.) or epson.ca/support (Canada) for the latest in compatibility and drivers for your product. Parent topic: Technical Specifications Printing Specifications Printing method Nozzle configuration Resolution Control code Media feed method Built-in memory On-demand ink jet SC
  • Epson SureColor S60600 | User Manual - Page 133
    : Printing: approximately 480 W (ISO/IEC24712) Ready mode: approximately 330 W Sleep mode: approximately 12 W Power off mode: 1.5 W SC-S60600: Printing: approximately 745 W (ISO/IEC24712) Ready mode: approximately 445 W Sleep mode: approximately 13 W Power off mode: 1.8 W Parent topic: Technical
  • Epson SureColor S60600 | User Manual - Page 134
    Height Width Depth Weight (without ink) SC-S40600: Stored: 52.7 inches (1338 mm) Printing: 65.7 inches (1670 mm) SC-S60600: Stored: 52.7 inches (1338 mm) Printing: 65.7 inches (1670 mm) SC-S40600: Stored: 103.1 inches (2620 mm) Printing: 103.1 inches (2620 mm) SC-S60600: Stored: 103.1 inches (2620
  • Epson SureColor S60600 | User Manual - Page 135
    ml Note: For best printing results, use up a cartridge within 6 months of opening the package. Parent topic: Technical Specifications Related references Ink Cartridge Specifications Media Specifications Print quality is greatly affected by the type and quality of media used. Always test a sample of
  • Epson SureColor S60600 | User Manual - Page 136
    Note: Do not use media that is wrinkled, scratched, torn, or dirty. Roll media Roll core size Roll outer diameter Media width Media thickness Roll weight 2 or 3 inches (50.8 to 76.2 mm) Up to 9.8 inches (250 mm) 11.8 to 64.0 inches (300
  • Epson SureColor S60600 | User Manual - Page 137
    Terms Trademarks Copyright Notice Important Safety Instructions Before using your Epson product, read and follow these safety instructions. General Product Safety Instructions Ink Cartridge Safety Instructions Parent topic: Notices General Product Safety Instructions • Be sure to follow all warnings
  • Epson SureColor S60600 | User Manual - Page 138
    sure you replace them with fuses of the correct size and rating. • Always turn off the product service the product yourself. • Unplug the product and refer servicing to qualified service controls that are covered by the operating instructions. • When storing or transporting the product,
  • Epson SureColor S60600 | User Manual - Page 139
    details. Parent topic: Important Safety Instructions Ink Cartridge Safety Instructions • Keep ink cartridges out of the reach of children and do not drink the ink. • Be careful when you handle used ink cartridges; there may be ink remaining around the ink supply port. If ink gets on your skin, wash
  • Epson SureColor S60600 | User Manual - Page 140
    otherwise, the ink may leak. • Store ink cartridges at room temperature in a location that is not exposed to direct sunlight. • After bringing an ink cartridge inside if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation
  • Epson SureColor S60600 | User Manual - Page 141
    Version1.2 or its latest version until five (5) years after the discontinuation of same model of this printer product. If you desire to receive the source code of the Bonjour Programs, contact Epson support. You can redistribute Bonjour Programs and/or modify it under the terms of the Apple Public
  • Epson SureColor S60600 | User Manual - Page 142
    , to anyone other than You; and/or (b) to use Covered Code, alone or as part of a Larger Work, in any way to provide a service, including but not limited to delivery of content, through electronic communication with a client other than You. 1.5 "Larger Work" means a work which combines Covered
  • Epson SureColor S60600 | User Manual - Page 143
    Source Code that alter or restrict this License or the recipients' rights hereunder, except as permitted under Section 6. 2.2 Modified Code. You may modify Covered Code and use, reproduce, display, perform, internally distribute within Your organization, and Externally Deploy Your Modifications and
  • Epson SureColor S60600 | User Manual - Page 144
    may choose to offer, and to charge a fee for, warranty, support, indemnity or liability obligations and/or other rights consistent with the scope terms applicable to Covered Code created under this License. 8. NO WARRANTY OR SUPPORT. The Covered Code may contain in whole or in part pre-release,
  • Epson SureColor S60600 | User Manual - Page 145
    "Apple", "Apple Computer", "Mac", "Mac OS", "QuickTime", "QuickTime Streaming Server" or any other trademarks, service marks, logos or trade names belonging to Apple (collectively "Apple Marks") or to any trademark, service mark, logo or trade name belonging to any Contributor. You agree not to use
  • Epson SureColor S60600 | User Manual - Page 146
    Covered Code which have been properly granted prior to termination shall survive any termination of this License. Provisions which, by their nature, should remain in effect beyond the termination of this License shall survive, including but not limited to Sections 3, 5, 8, 9, 10, 11, 12.2 and 13. No
  • Epson SureColor S60600 | User Manual - Page 147
    License. The application of the United Nations Convention on Contracts for the International Sale of Goods is expressly excluded. 13.7 Entire Agreement; Governing Law. This License constitutes the entire agreement between the parties with respect to the subject matter hereof. This License shall be
  • Epson SureColor S60600 | User Manual - Page 148
    addresses or the Info-ZIP URL(s), such as to imply Info-ZIP will provide support for the altered versions. 4. Info-ZIP retains the right to use the names Trademarks EPSON® and SureColor® are registered trademarks, and EPSON Exceed Your Vision is a registered logomark of Seiko Epson Corporation.
  • Epson SureColor S60600 | User Manual - Page 149
    or alterations to this product, or (excluding the U.S.) failure to strictly comply with Seiko Epson Corporation's operating and maintenance instructions. Seiko Epson Corporation shall not be liable for any damages or problems arising from the use of any options or any consumable products other than
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149

Epson
®
SureColor
®
S40600/S60600
User's Guide