Epson SureColor S70670 User Manual - Page 148

Menu Media Setup See "The Media Setup Menu" on page 152. Item Media Remaining Remaining Setup Length Remaining Alert Print Remaining Length Select Media Customize Settings Current Settings RIP Settings Platen Gap Head Alignment Input thickness. Roll Type Tension Measurement Media Tension 1 to 30 (media setting bank) Setting Name Feed Adjustment Platen Gap Head Alignment Heating & Drying Heater Temperature Drying Time Per Pass After Heater Feed Additional Dryer Parameter On, Off 5.0 to 99.5 m (15 to 300 ft) 1 to 15 m (4 to 50 ft) Print RIP Settings, 1 to 30 (media setting bank number) Change settings for currently selected media. The options available depend on whether RIP Settings or a media setting bank is selected. The options available for RIP settings and media setting banks 1 to 30 are listed below. 1.5, 2.0, 2.5 Auto(Uni-D), Auto(Bi-D), Auto(Dual Head)1, Manual(Uni-D), Manual(Bi-D), Manual (Dual Head)1 Printable Side Out, Printable Side In Periodically, Every Page, Off 0 to 40 Up to 22 half-size characters Auto, Manual 1.5, 2.0, 2.5 Auto(Uni-D), Auto(Bi-D), Auto(Dual Head)1, Manual(Uni-D), Manual(Bi-D), Manual (Dual Head)1 Pre-heater/platen heater: 30 °C to 50 °C (86 °F to 122 °F) After heater: 30 °C to 55 °C (86 °F to 131 °F) 0 to 10 sec Mode 1, Mode 2, Off On, Off Using the Control Panel Menu 148