Epson SureColor T3170x Start Here - Installation Guide
Epson SureColor T3170x Manual
 |
View all Epson SureColor T3170x manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson SureColor T3170x manual content summary:
- Epson SureColor T3170x | Start Here - Installation Guide - Page 1
Epson® SureColor® T3170x Start Here IMPORTANT: Before using this product, make sure you read these instructions and the safety instructions in the online User's Guide. Choose a Location for the Printer Choose a location for the printer that is near a wall outlet where the power cord can be easily - Epson SureColor T3170x | Start Here - Installation Guide - Page 2
or belongings, it may not come off. Note: • Epson cannot guarantee the quality or reliability of third-party ink. • Use the ink bottles included with the printer to set up the product. Part of the ink will lowest line could damage the product. See the online User's Guide for refilling instructions. - Epson SureColor T3170x | Start Here - Installation Guide - Page 3
Guide icon, go to the Epson website, as described below. Epson technical support Visit www.epson.com/support/t3170x (U.S.) or www.epson.ca/support/t3170x (Canada) to download software and utilities, view manuals, get FAQs and troubleshooting advice, or contact Epson. Epson provides technical support - Epson SureColor T3170x | Start Here - Installation Guide - Page 4
-463-7766). Epson SureColor T3170x replacement ink bottles Color Black Cyan Magenta Yellow 140 ml T49H100 T49H200 T49H300 T49H400 EPSON and SureColor are registered trademarks and EPSON Exceed Your Vision is a registered logomark of Seiko Epson Corporation. Epson Preferred is a service mark of
-
1 -
2 -
3 -
4
 |
 |
Epson
®
SureColor
®
T3170x
Start Here
IMPORTANT:
Before using this product, make sure you read these instructions
and the safety instructions in the online
User’s Guide
.
Choose a Location for the Printer
Choose a location for the printer that is near a wall outlet where the power cord
can be easily unplugged. Avoid places subject to rapid changes in temperature
and humidity. Also keep the printer away from direct sunlight, strong light, or
heat sources.
Make sure to place the printer on a flat, stable surface with enough space on all
sides (see illustration below). The surface supporting the printer should be wider
than the space between the rubber feet on the bottom of the printer and capable
of supporting the weight shown below.
5.9 in.
(150 mm)
Weight: 63.93 lbs (29 kg)
1.97 in.
(50 mm)
12.20 in.
(310 mm)
5.9 in.
(150 mm)
H
D
W
Unpack
1
Make sure you have these items:
Printer and roll spindle
Output tray
Ink bottles
Limited warranty
Power cord
Note:
•
See the online
User's Guide
for instructions on using the output tray and
assembling the optional stand and paper basket.
•
Do not open the ink bottles until you are ready to fill the ink tanks. The ink
bottles are vacuum packed to maintain reliability.
WARNING:
The printer requires two people to lift and move it. Make sure to
grip the printer as shown in the illustration.
Caution:
Do not hold the printer by its paper support.
2
Remove the plastic sheet and all tape from the outside of the printer.
3
Open the left cover.
4
Remove the tape and the protective piece.
5
Close the left cover.
6
Open the front cover.
7
Turn and remove the protective piece.
8
Close the front cover.
9
Remove the protective film from the control panel.
Note:
The touch screen will not operate if you do not remove the
protective film.