Epson SureColor T3170x Start Here - Installation Guide - Page 2

Fill Ink Tanks

Get Epson SureColor T3170x PDF manuals and user guides View all Epson SureColor T3170x manuals
Add to My Manuals
Save this manual to your list of manuals

Page 2 highlights

10 Open the cut sheet cover and remove the tape inside the printer. 2 Open the cap for the black ink. 11 Open and fold back the roll paper cover. Note: Refer to the color-coded sticker on the ink tank unit to identify the color of each tank. 3 Unpack the black (BK) ink bottle. Hold the ink bottle upright and slowly turn the bottle cap to remove it. 12 Remove the tape and the protective pieces. Caution: Do not squeeze the ink bottle. Do not touch the top of the ink bottle after its cap is removed. 4 Insert the ink bottle into the filling port, as shown below. 13 Close the roll paper cover and the cut sheet cover. 14 Dispose of all the tape and the protective pieces. Fill Ink Tanks Warning: Keep the ink bottles out of the reach of children and do not drink the ink. Caution: This product requires careful handling of ink. If ink spills, wipe it off immediately with a damp towel to avoid permanent stains. If ink gets on your clothes or belongings, it may not come off. Note: • Epson cannot guarantee the quality or reliability of third-party ink. • Use the ink bottles included with the printer to set up the product. Part of the ink will be used to charge the print head. These bottles may print fewer pages compared with replacement ink bottles. 1 Open the ink tank cover. 5 Wait for the ink to fill the tank. Do not squeeze the bottle. Ink flows into the tank and stops automatically when the ink tank is filled to the upper line. Note: If ink does not flow from the bottle, lift and reinsert the bottle. Caution: After setup, periodically inspect the ink level to ensure it is not below the lowest line on the tank. Prolonged use when ink is below the lowest line could damage the product. See the online User's Guide for refilling instructions.

  • 1
  • 2
  • 3
  • 4
10
Open the cut sheet cover and remove the tape inside the printer.
11
Open and fold back the roll paper cover.
12
Remove the tape and the protective pieces.
13
Close the roll paper cover and the cut sheet cover.
14
Dispose of all the tape and the protective pieces.
Fill Ink Tanks
Warning:
Keep the ink bottles out of the reach of children and do not drink the ink.
Caution:
This product requires careful handling of ink. If ink spills, wipe it off
immediately with a damp towel to avoid permanent stains. If ink gets on your clothes
or belongings, it may not come off.
Note:
•
Epson cannot guarantee the quality or reliability of third-party ink.
•
Use the ink bottles included with the printer to set up the product. Part of the
ink will be used to charge the print head. These bottles may print fewer pages
compared with replacement ink bottles.
1
Open the ink tank cover.
2
Open the cap for the black ink.
Note:
Refer to the color-coded sticker on the ink tank unit to identify the color
of each tank.
3
Unpack the black (BK) ink bottle. Hold the ink bottle upright and
slowly turn the bottle cap to remove it.
Caution:
Do not squeeze the ink bottle. Do not touch the top of the ink bottle
after its cap is removed.
4
Insert the ink bottle into the filling port, as shown below.
5
Wait for the ink to fill the tank. Do not squeeze the bottle. Ink flows
into the tank and stops automatically when the ink tank is filled to the
upper line.
Note:
If ink does not flow from the bottle, lift and reinsert the bottle.
Caution:
After setup, periodically inspect the ink level to ensure it is not
below the lowest line on the tank. Prolonged use when ink is below the lowest
line could damage the product. See the online
User's Guide
for refilling
instructions.