Epson SureColor T3170x Start Here - Installation Guide - Page 1

Epson® SureColor® T3170x Start Here IMPORTANT: Before using this product, make sure you read these instructions and the safety instructions in the online User's Guide. Choose a Location for the Printer Choose a location for the printer that is near a wall outlet where the power cord can be easily unplugged. Avoid places subject to rapid changes in temperature and humidity. Also keep the printer away from direct sunlight, strong light, or heat sources. Make sure to place the printer on a flat, stable surface with enough space on all sides (see illustration below). The surface supporting the printer should be wider than the space between the rubber feet on the bottom of the printer and capable of supporting the weight shown below. 1.97 in. (50 mm) W 5.9 in. (150 mm) 12.20 in. (310 mm) H D 5.9 in. (150 mm) Weight: 63.93 lbs (29 kg) Unpack 1 Make sure you have these items: 2 Remove the plastic sheet and all tape from the outside of the printer. 3 Open the left cover. 4 Remove the tape and the protective piece. 5 Close the left cover. 6 Open the front cover. Ink bottles Power cord Printer and roll spindle Output tray Limited warranty Note: • See the online User's Guide for instructions on using the output tray and assembling the optional stand and paper basket. • Do not open the ink bottles until you are ready to fill the ink tanks. The ink bottles are vacuum packed to maintain reliability. WARNING: The printer requires two people to lift and move it. Make sure to grip the printer as shown in the illustration. 7 Turn and remove the protective piece. 8 Close the front cover. 9 Remove the protective film from the control panel. Caution: Do not hold the printer by its paper support. Note: The touch screen will not operate if you do not remove the protective film.