Epson TM-H6000IV-DT ePOS-Device XML Users Manual - Page 31
The setting screen for each device appears., Register the connected device into TM-i., IP Address
View all Epson TM-H6000IV-DT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Chapter 2 Building Environment 4 The setting screen for each device appears. Register the connected device into TM-i. ❏ Printer Confirm that the local printer is registered using the following procedure: 1. Confirm that "TM-i" is registered for the device ID "local_printer" in [Registered printers]. 2. Click [Test printing]. Check that printing can be done in the registered printer. Register the connected network printer using the following procedure: 1. Set the following items and click [Add]. Item Device ID Model IP Address Retry interval(ms) Description Enter the ID (any character string) of the printer to be controlled. Select the model of the printer to be controlled. Specify the IP address of the printer for each device ID. Specify the retry interval after timeout. 2. After confirming that the printer is added to [Registered printers], click [Test printing]. Check that printing can be done in the registered printer. ❏ Customer Display 2 The device ID of the customer display is fixed to "local_display". Register the connected customer display in the following procedure: 1. Select [Use]. 2. Set the following items and click [Apply]. Item Communications settings Brightness settings Description Set the communication speed, data bit and parity. Set the brightness of the customer display. 3 Click [Test display]. Confirm that the characters are displayed on the customer display. ❏ Key Input Device Register the connected key input device in the following procedure: 1. Set the following items and click [Add]. Item Device ID Device name Control Script Description Enter the device ID (any character string). Select the device name of the key input device. Select the device control script to be used for the key input device. 2. After confirming that the device is added to [Registered key input device], click [ Operating test]. 3. The screen appears. Operate the key input device and confirm that the operation result is displayed properly. 31