Epson TM-T20II-i TM-i Series WebConfig API Users Manual for TM-i firmware ver. - Page 41

Chapter 3 Reference Setting a TM printer General SettingUrl : set_device_tcpip.cgi Changes the network settings for a TM printer connected to the TM-i. Setting is possible under the following conditions. • TM-i and TM printers are connected to the same subnet network by a LAN cable. (Setting is not possible if the TM-i and TM printers are connected by a wireless LAN.) • A TM-i printer and wireless LAN interface with a USB connector of a TM printer are connected by USB. (UB-R03) POST parameter Specifiable value Description MACAddress (String) Specifies the MAC address. HostName (String) Specifies the IP address. IPAddressSettingMethod Specifies the IP address setting method. Auto Auto APIPA Manual Manual Refers to whether to enable or disable APIPA. 3 Enable Enable Disable Disable IPAddress (String) Specifies the IP address. SubnetMask (String) Specifies the subnet mask. Gateway (String) Specifies the default gateway. Password (String) Specifies a new password to be set using a single-byte alphanumeric character string 0 (zero) character or more and 20 characters or less long. Wireless LAN SettingUrl : set_device_wireless.cgi Changes the wireless LAN settings for a TM printer connected to the TM-i. Setting is possible under the following conditions. • A TM-i printer and wireless LAN interface with a USB connector of a TM printer are connected by USB. (UB-R03) POST parameter MACAddress HostName NetworkMode SSID Specifiable value (String) (String) Infrastructure Adhoc (String) Description Specifies the MAC address. Specifies the IP address. Specifies the network mode. Infrastructure mode Adhoc mode Specifies the SSID by a character string using single-byte alphanumeric characters and spaces, 1 character or more to 32 characters or less long. 41