Epson TM-T20II-i Device Data Notification Users Manual - Page 16

TM Intelligent Printer Settings Register the Devices Register the scanner and customer display using EPSON TMNet WebConfig. 1 Turn off the TM intelligent printer and connect the scanner and customer display. Then, turn on the TM intelligent printer. 2 Start the Web browser on the setup computer and enter as follows: http://[IP address of the TM-i]/webconfig/ 3 EPSON TMNet WebConfig starts. 4 Register the scanner. Select [configuration] - [Web Service Settings] - [Device Admin] - [Device Registration] - [Key Input Device]. 5 The "Key Input Device" screen appears. Set the following items and click [Apply]. Item Device ID Device name Control script Description Set the device ID. Enter "local_scanner". Confirm that the connected scanner is selected. Set the control script. Select "Scanner_Generic.js". 6 The scanner is added to the registered key input devices. Click [Operating test] and check whether the registered scanner operates properly. 7 Register the customer display. Select [configuration] - [Web Service Settings] - [Device Admin] - [Device Registration] - [Customer Display]. 8 The "Customer Display" screen appears. Set the following items and click [Apply]. Item Description Customer Display Select [Use]. Communication settings Communication speed (bps) Data bit Set the communication speed. Select the communication speed according to the customer display. Set the data bit. Select the data bit according to the customer display. Parity Set the parity. Select the parity according to the customer display. Brightness setting Set the brightness. Select the brightness as desired. 16