Epson TM-U220 Guide for right side up printing - Page 14

Confidential m Function Function A 0, 48, 1, 49 Defines the end of a block of text to be printed in reverse order and executes a cut. Function B 65, 66 Defines the end of a block of text to be printed in reverse order and feeds paper to (cutting position + n × vertical motion unit) and executes a cut. •The paper is completely or partially (with one point left uncut) cut depending on the printer model. [Note] ï Once the block has been printed in reverse order, a cut is performed. If DIP switch 1-1 is ON, reverse print mode will automatically restart. If DIP switch 1-1 is OFF, further data received after this command will be printed in normal sequence. ï Blank lines received immediately before this cut command will not be processed in reverse order. They will be processed immediately before the actual cut takes place. Also, an additional 3 lines are fed immediately before the cut takes place and an additional 6 lines are fed immediately after. This adjustment improves the cut position relative to the receipt text. ï This command is enabled only when processed at the beginning of the line. If this command processed at at any other point, the printed result isnít guaranteed. ï For other notes, see the ìESC/POS Application Programming Guide.î 6 Rev. A