Epson TM-U590 Users Manual - Page 7
Using the Power Switch Cover, Installing the Ribbon Cassette - slip printer
View all Epson TM-U590 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Using the Power Switch Cover English WARNING: If an accident occurs with the power switch cover attached, unplug the power cord 2 immediately. Continued use may cause EPSON fire. The enclosed power switch cover keeps the power switch from being pressed accidentally. To use the cover, install it as shown in illustration 2. FORWARD REVERSE SRLIEEPPRLOERAWOSREER RELEASE Installing the Ribbon Cassette Use the EPSON ERC-31 ribbon cassette. The use of any ribbon cassettes other than those approved by Epson may damage the printer and will void the warranty. CAUTION: Never turn the ribbon cassette's feed knob in the opposite direction of the arrow marked on the cassette; otherwise the ribbon cassette may be damaged. 1. Turn the printer on, and open the front cover by pulling up the tab on the left side. 2. Be sure the print head is on the right side. 3. If a ribbon is already installed, remove it by grasping the end of the tab and removing it from the printer. 4. Turn the cassette knob on the 3 cartridge in the direction of the arrow 2 or 3 times to remove any slack. 5. Insert the ribbon, and rotate the cassette knob 2 or 3 more times, as shown in illustration 3. FORWARD PO ER R WE RELORERASE SLIP RELEASE REVERSE 6. Make sure the ribbon has no wrinkles or creases and is installed below the print head as shown on the label inside the printer. TM-U590/U590P User's Manual 7