Epson TM-U590 Users Manual - Page 8
Inserting Slip Paper, Troubleshooting, light is flashing, and nothing is printing - printer manual
View all Epson TM-U590 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
English Inserting Slip Paper Note: Use only slip paper that matches the specification. Do not use wrinkled or curled paper. 1. When the SLIP LED flashes, insert slip paper, using the right edge of the slip paper inlet as a EPSON guide (see illustration 4). 2. When you insert the slip into the inlet as far as it will go, the sensor detects the slip, the SLIP LED 2 changes from flashing to on, and the printer draws the paper in and prints it. 3. After printing is complete, the SLIP LED goes off, and you can remove the slip. 4 FORWARD POEWRERRREOLSRELAIPRSEELEASE REVERSE 1 Troubleshooting No lights on the control panel Check that power supply cables are plugged into the printer, the power unit, and power outlet correctly. The printer sounds like it is printing, but nothing is printing Check that the ribbon cassette is installed correctly. Replace the ribbon cassette. The ERROR light is flashing, and nothing is printing Turn the printer off, and check for a paper jam. If the printer has been printing for awhile, the print head may be too hot. This corrects itself when the print head cools down. Turn the printer off, and after 10 seconds, turn it back on. If there is still a problem, contact a qualified servicer. A line of dots is missing in the printout The print head may be damaged. Contact a qualified service person for repair. 8 TM-U590/U590P User's Manual