Epson TM-U675 Installation Manual PT-6000 - Page 1
Epson TM-U675 Manual
![]() |
View all Epson TM-U675 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
401344201 PT-6000/DPR-6000/TA-6000 Installation Manual Installing the PT-6000 The PT-6000 is an optional tray to hold a TM-H6000/H6000II/H6000III printer, especially when it is used with an IBM® host computer. Because this tray can hold the printer at an angle, it does not require much space behind it. Therefore, the tray is a valuable space-saving device for small countertops. The package includes the PT-6000 and 2 sets of affixing tape. Note: Before installing the PT-6000, clean any dirt, oil, or other foreign matter off of the countertop or other surface where the printer will be installed. Follow the steps below to install the PT-6000. If you are installing the printer on an IBM 469X series computer with a projection around the host computer, see the other side of this sheet. 1. With 2 pieces of the affixing tape combined, peel off the stickers on one side of the 2 sets of combined tape, and paste them to the bottom of the PT-6000. 2. Peel off the stickers on the other sides of the affixing tapes, and press the PT-6000 onto the countertop; it will be held firmly in place by the affixing tapes. PT-6000 Projections Affixing tape 3. Connect the cable and install the printer on the PT-6000, aligning the 4 rubber feet of the printer with the 4 projections on the PT-6000 shown above. IBM is a registered trademark of International Business Machines Corporation. © 2000 Seiko Epson Corporation. All rights reserved. Printed in China
![](/manual_guide/products/epson-tmu675-installation-manual-pt6000-2c98dcd/1.png)