Epson U295 User Manual - Page 3

Total thickness Single-ply: 0.09 to 0.25 mm {0.0035 to 0.0098"} Copy paper: 0.09 to 0.35 mm {0.0035 to 0.0138"} Number of copies Original + 1 or 2 copies at 5 to 40°C {41 to 104°F} Ribbon cassette ERC-27 Interface (compatible) RS-232 serial or IEEE 1284 parallel Receive buffer 512 bytes or 35 bytes DKD Function Power supply*1 2 drives + 24 VDC ± 10% Current consumption Operating: (at 24V) Standby: Mean: Approx. 600 mA Peak: Approx. 5.5 A Approx 100 mA Life Mechanism: 3,000,000 lines Print head: 150 million characters (at 2 dots/wire per character) Ribbon: 1.5 million characters (using a 5 × 7 font) MTBF 180,000 hours MCBF 7,000,000 lines Temperature Operating: Storage: 5 to 40°C {41 to 104°F} -10 to 50°C {14 to 122°F}, except ribbon and paper Humidity Operating: Storage: 30 to 85% RH 30 to 90% RH, except ribbon and paper Overall dimensions 101.5 × 180 × 190.5 mm {4.0 × 7.09 × 7.5"} (H × W × D) Weight (mass) Approximately 1.6 kg {3.52 lb} *1: Be sure to use a safety-standards-applied power source that meets the following specifications. Rated output: 24 V/2.0 A or more, Maximum output: 240 VA or less Standards and Approvals The following standards are applied only to the printers that are so labeled. (EMC is tested using the Epson power supplies.) Europe: CE marking North America: FCC/ICES-003 Class A Oceania: AS/NZS CISPR Class A WARNING This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. The connection of a non-shielded printer interface cable to this printer will invalidate the EMC standards of this device. You are cautioned that changes or modifications not expressly approved by Seiko Epson Corporation could void your authority to operate the equipment. CE Marking The printer conforms to the following Directives and Norms: Directive 2004/108/EC EN 55022 Class A EN 55024 IEC 61000-4-2 IEC 61000-4-3 IEC 61000-4-4 Directive 90/384/EECEN 45501 IEC 61000-4-5 IEC 61000-4-6 IEC 61000-4-11 FCC Compliance Statement For American Users This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense. For Canadian Users This Class A digital apparatus complies with Canadian ICES-003. À l'intention des utilisateurs canadiens Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. 3