Epson V11H128020 Quick Start - Page 4
Plug in and turn
UPC - 010343847408
View all Epson V11H128020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
4 Plug in and turn on 1 Remove the lens cover. 2 Connect the power cord to the projector and plug the other end into an electrical outlet. The power light turns orange. 3 If you are connecting a device other than a computer, turn on your equipment. (If you are connecting to a computer, don't turn it on yet.) 4 Press the Power button on the projector or remote control. You hear a beep, the power light flashes green, and the projector lamp comes on in about 6 seconds. Power button 5 If you are using a computer, turn it on now. 6 Start your video or presentation. If you have connected more than one video source, press the Source buttons Computer or S-Video/Video button on the projector remote control to select the one you want to watch. NOTE If you connected a notebook computer and no image is being projected, you may need to set up the notebook to output signals externally. See the Troubleshooting section for instructions. Turning off the projector 1 When you're finished using the projector, first turn off the video source. 2 Press the Power button on the projector or remote control. 3 When you see the confirmation message, press the Power button again. The power light flashes orange as the projector cools down. 4 When the power light is a steady orange, unplug the projector. Caution: Never unplug the projector when the power light is green or flashing orange.