Epson V350 Product Information Guide - Page 6

Epson Perfection V350 Photo 1. Make sure you have installed Epson Scan and have turned on your computer. 2. Remove the document mat. (See page 4.) 3. Close the scanner cover. Note: Always open the film guide whenever you use the auto film loader, no matter how short the film strip is; otherwise, it may cause a film jam. 6. Place a film strip into the auto film loader with its shiny base side facing down. Your images and any wording on the film strip should appear backwards on the side that faces up. Slowly slide the film into the loader. Let go of the film when the scanner begins to automatically feed it into position. Note: Make sure nothing is on the document table before you close it. 4. Press and release the back of the auto film loader cover to open it. Note: If you have difficulty inserting your film, slightly bend the film so that it straightens out. 5. Flip out the metal film guide and press it all the way down. Caution: Hold the edge of the film gently or use gloves to touch the film; otherwise you may damage the film. When loading starts, let go of the film; otherwise, it may cause a film jam. If the film does not feed into the auto film loader, wait 10 seconds and try again. Do not touch the film, close the auto film loader cover, press the 5 Eject button, or open the scanner cover during scanning. If the Status light is flashing red, film may have jammed. When you are ready to eject your film, see the next section. 6 - Epson Perfection V350 Photo 8/06