Epson WorkForce 610 Network Installation Guide - Page 20
Choose Security Settings, Settings and Connect to the Network
UPC - 010343871878
View all Epson WorkForce 610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
10. Press OK to select the default channel for your Ad Hoc network. 11. Continue with the next section. Choose Security Settings 1. Press u or d to select the security mode you want to use for the Ad Hoc wireless network, then press OK. Note: If you don't want to enable security for your Ad Hoc network, select None, then press OK. 2. Do one of the following: ■ If you selected None as the security mode, continue with "Confirm Your Settings and Connect to the Network" on page 22. ■ If you selected WEP as the security mode, continue with step 3. 3. Create a WEP key for the Ad Hoc network. The WEP key can be in alphanumeric (ASCII) format (recommended) or hexadecimal format. Note: An alphanumeric WEP key must be 5 or 13 characters. A hexadecimal WEP key must be 10 or 26 characters. 4. Press u or d to select Alphanumeric if your WEP key is ASCII, or select Hexadecimal if your WEP key is in hexadecimal format. 20 Wireless Network Installation