Epson WorkForce 630 Start Here - Page 1
Epson WorkForce 630 Manual
View all Epson WorkForce 630 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
WorkForce® 630 Series Start Here Read these instructions before using your product. These instructions are for the WorkForce 630/632/633/635. 1 Unpack 2 Raise the control panel and press the On button. To lower the control panel, press the release bar underneath. Phone cord Power cord French control panel stickers (included for Canada only) Caution: Do not open ink cartridge packages until you are ready to install the ink. Cartridges are vacuum packed to maintain reliability. Remove all protective materials. 3 Select settings 1 To select English as your language, press OK. Caution: Do not remove the plastic strip shown below. It is part of the Automatic Document Feeder. 2 Turn on 1 Connect the power cable. (If you want to change the language, press or to select it, then press OK.) 2 Select your Country/Region and press OK. 3 Select On if Daylight Saving Time is in effect (spring through summer), otherwise select Off. Press OK. 4 Select the Date format and press OK. 5 Press the number keys to enter the Date and press OK. 6 Select the Time format (12h or 24h) and press OK. 7 Press the number keys to enter the Time. Then press or to select AM or PM, if necessary. 8 Press OK. 4 Install ink cartridges 1 Lift up the scanner. Caution: Do not connect to your computer yet. *411856600* *411856600*