Epson WorkForce Enterprise WF-C20600 Users Guide - Page 380

Product Makes Noise When It Sits for a While Your product is performing routine maintenance. This is normal. Parent topic: Solving Copying Problems Solving Copy Quality Problems Check these sections if your copies have a quality problem. Copies Have Incorrect or Faint Colors Position, Size, or Margins of Copies are Incorrect Parent topic: Solving Problems Copies Have Incorrect or Faint Colors If your copies have incorrect, uneven, smeared, or faint colors, try these solutions: • Run a print head nozzle check to see if any of the nozzles are clogged. Then clean the print head, if necessary. • Do not press too hard on the original when you copy from the scanner glass. • Clean the scanner glass with a soft, dry, lint-free cloth or use a small amount of glass cleaner on the cloth, if necessary. Paper towels are not recommended. Caution: Do not spray glass cleaner directly on the scanner glass. • Clean the ADF. • Wipe any dirt or dust off of your originals. • If the colors are smeared, try lowering the copy density setting on the LCD screen. • Make sure your paper is not curled. • When vertical banding appears or the paper is smeared, clean the paper path. • When horizontal banding appears or the top or bottom of the paper is smeared, load paper in the correct direction and slide the edge guides to the edges of the paper. • When copying on thick paper, select a Thick Paper setting from the control panel (Settings > General Settings > Printer Settings > Thick Paper). When this setting is enabled, copy quality may decline and copy speed may decrease. 380