Epson WorkForce Pro WF-C4810 Users Guide - Page 69
Error code and message, Solution, Obtain IP Address, Manual, Obtain IP, Address, TCP/IP Setup
View all Epson WorkForce Pro WF-C4810 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Error code and message Solution E-9 Make sure your computer or network device are turned Confirm the connection and network setup of the PC or other device. Connection using the EpsonNet Setup is available. Contact on. Also make sure that you can access the Internet and other devices on the same network from the devices you are trying to connect to your product. your network administrator for assistance. If you still cannot connect to your product, turn off your router or access point, wait about 10 seconds, and turn it on again. Download and install your product software again to reset your network settings. E-10 Confirm IP address, subnet mask, and default gateway setup. Connection using the EpsonNet Setup is available. Contact your network administrator for assistance. Make sure other devices on the network are turned on and do the following: • If your product's Obtain IP Address setting is set to Manual, check the IP address, subnet mask, and default gateway addresses on the network connection report to see if they are correct. If not, correct the settings. • If DHCP is enabled, set your product's Obtain IP Address setting to Auto. If you want to use the DHCPassigned address as a static address, set the Obtain IP Address setting to Manual, enter the product's IP address as listed on the network connection report, and set the subnet mask to 255.255.255.0. If you still cannot connect to your product, turn off your router or access point, wait about 10 seconds, and turn it on again. E-11 Setup is incomplete. Confirm default gateway setup. Connection using the EpsonNet Setup is available. Contact your network administrator for assistance. If you set your product's TCP/IP Setup setting to Manual, check that the default gateway address listed on the network connection report is correct. Also turn on the device that is set as the default gateway. 69