Epson WorkForce Pro WF-C5710 Administrator Guide - Page 41
LDAP Connection Report Messages, Configuring Protocols in Web Config - review
View all Epson WorkForce Pro WF-C5710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
LDAP Connection Report Messages You can review the connection report messages to diagnose LDAP connection problems in Web Config. Message Connection test was successful. Connection test failed. Check the settings. Connection test failed. Check the date and time on your printer or server. Authentication failed. Check the settings. Cannot access the printer until processing is complete. Description Connection to the server is successful One of the following occurred: • The LDAP server address or port number is incorrect • A timeout occurred • You selected Do Not Use as the Use LDAP Server setting • If you selected Kerberos Authentication as the Authentication Method setting, the Kerberos server settings are incorrect Connection failed because the time settings for the product and the LDAP server do not match Authentication failed because the User Name and Password settings are incorrect or, if you selected Kerberos Authentication as the Authentication Method setting, the time and date are not configured correctly The product is busy Parent topic: Using an LDAP Server Configuring Protocols in Web Config You can enable or disable protocols using Web Config. 1. Access Web Config and select the Network Security tab. 2. Select or deselect the checkbox next to the service name to enable or disable a protocol. 3. Configure any other available protocol settings. 4. Click Next. 5. Click OK. After the protocols restart, the changes are applied. 41