Epson WorkForce Pro WP-4010 Start Here - Page 1
Epson WorkForce Pro WP-4010 Manual
View all Epson WorkForce Pro WP-4010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
WorkForce® Pro WP-4010 Series Start Here Read these instructions before using your printer. 1 Unpack 3 Install ink cartridges 1 Open the front cover. 2 Unpack the four ink cartridges. Caution: Do not open ink cartridge packages until you are ready to install the ink. Cartridges are vacuum packed to maintain reliability. Remove all tape and protective materials, including the foam and plastic inside the printer. 3 Shake each cartridge as shown for about 5 seconds. 4 Install each cartridge in the correct slot for its color. Push each cartridge in until it clicks. 5 Close the front cover. 2 Turn on 1 Connect the power cord to the back of the printer and to an electrical outlet. Caution: Do not connect to your computer yet. 2 Press the power button. The printer starts priming the ink. This takes about 12 minutes. When the green power light stops flashing, priming is complete. Note: The included cartridges prime the printer and print about 1000 black pages/900 color pages. Actual page count will vary. Caution: Don't turn off the printer or open the cover while it is priming or you'll waste ink. *412238700* *412238700*