Epson WorkForce Pro WP-4010 Start Here - Page 2

4 Load paper in the cassette You can load letter-, A4-, or legal-size plain paper in the cassette. For instructions on loading envelopes and special paper in the rear MP tray, see the online User's Guide. 1 Pull out the paper cassette. 4 Slide the edge guides against the paper, but not too tight. Make sure the paper is under the tabs on the edge guides. 5 Gently insert the paper cassette. 2 Slide the edge guides outward, and position them for the size of paper you are using. N ote: If you are loading legal-size paper, extend the cassette as shown. N ote: The paper may slide forward slightly as you insert the cassette. This is normal. 6 Extend the output tray and raise the paper stopper as shown. (Do not raise the paper stopper for legal-size paper.) 3 Insert the paper with the glossy or printable side facedown. N ote: Make sure the paper is loaded against the front edge guide and not sticking out from the end of the cassette. 5 Install software Note: If your computer does not have a CD/DVD drive, you can download the software from the Epson website (see "Epson technical support"). Caution: Be sure to close your other programs, including any screen savers and virus protection software, before beginning this software installation. 1 Make sure the printer is NOT CONNECTED to a computer. Windows®: If you see a Found New Hardware screen, click Cancel and disconnect the USB cable. You can't install your software that way. 2 Insert your product CD.