Epson WorkForce Pro WP-4520 Start Here - Page 1
Epson WorkForce Pro WP-4520 Manual
View all Epson WorkForce Pro WP-4520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
WorkForce® Pro WP-4520 Series Start Here Read these instructions before using your product. 1 Unpack French control panel sticker Caution: Do not open ink cartridge packages until you are ready to install the ink. Cartridges are vacuum packed to maintain reliability. Remove all tape and protective materials, including the foam and plastic inside the printer. 3 Select settings 1 To select English as your language, press OK. If you want to change the language, select it and press OK. 2 Select your country and press OK. 3 Select Summer if Daylight Saving Time is in effect (spring through summer); otherwise, select Winter. Press OK. 4 Select the date format and press OK. 5 Use the numeric keypad to set the date and press OK. 6 Select 12h (AM/PM) or 24h and press OK. 7 Use the numeric keypad to set the time and press OK. Note: You can change the date and time settings by pressing Setup, selecting Printer Setup, then selecting Date/Time. 4 Install ink cartridges 1 Open the front cover. 2 Unpack the four ink cartridges. 2 Turn on 1 Connect the power cord to the back of the printer and to an electrical outlet. 3 Shake each cartridge as shown for about 5 seconds. Caution: Do not connect to your computer yet. 2 P ress the power button. 4 Install each cartridge in the correct slot for its color. Push each cartridge in until it clicks. *412238000* *412238000*