Epson WorkForce WF-2930 Users Guide - Page 296
Direct Send, Fax Settings, Send Settings, Rejection Fax, Parent topic, Related tasks
View all Epson WorkForce WF-2930 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 296 highlights
• If you connected your product to a DSL phone line, you must connect a DSL filter to the phone jack to enable faxing over the line. Contact your DSL provider for the necessary filter. • If you are connected to a DSL phone line, connect the product directly to a telephone wall jack and send a fax. If it works, the problem may be caused by the DSL filter. Contact your DSL provider. • Make sure you installed the FAX driver for your product and that it is not paused. • The data being sent may be too large. Try faxing the originals in batches or by using a connected phone. If you are faxing in monochrome, enable the Direct Send setting (Fax > Fax Settings > Fax Send Settings). • Try lowering your product's fax speed setting. • Try lowering the recipient's fax speed setting from the contact list menu. • If your telephone line uses call waiting and you have trouble receiving faxes, turn off call waiting to prevent disruption of incoming faxes. • If you have subscribed to a call forwarding service, the product may not be able to receive faxes. Contact your service provider for assistance. • If the recipient fax machine does not answer your call within 50 seconds after the product has finished dialing, add pauses after the fax number to send the fax. • When you have made settings to save received faxes to a computer, turn on the computer. The received fax is deleted once it has been saved to the computer. • If you enabled Rejection Fax options, check if the sender is blocked, did not set up header information, or is not registered in your contacts list, as necessary. • If you cannot send faxes at a specified time, make sure the date and time are set correctly on the product. Note: If your product is connected to a VoIP (Voice over Internet Protocol) phone line, keep in mind that fax machines are designed to work over analog phone lines. Epson cannot guarantee that fax transmission will work when using VoIP. If your phone line includes voice mail answering services, calls or faxes may be inadvertently received by your voice mail service. Parent topic: Solving Faxing Problems Related tasks Connecting a Telephone or Answering Machine Using the Fax Setup Wizard Selecting the Line Type 296