Epson WorkForce WF-3530 Quick Guide - Page 31
Printing and Copying Problems, Cannot Scan Over the Network, Print a Network Status Sheet - wireless color printer
View all Epson WorkForce WF-3530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
When the printer is connected to your network, the Wi-Fi light should be green, and not flashing. Make sure you install the software on every computer from which you want to print. When prompted during software setup, select The printer is already on my wireless network. Cannot Scan Over the Network ■ If you cannot scan from the product's control panel, make sure you restarted your computer after installing the product software. Make sure Epson Event Manager is not being blocked by your firewall or security software. Try turning off the firewall. ■ If you are scanning a large document at high resolution, a communication error may occur. If the scan did not complete, lower the resolution. ■ If network communication was interrupted while starting Epson Scan, exit Epson Scan and restart it after a few seconds. If Epson Scan cannot restart, turn the product off and on, and then try again. Check the Timeout Setting in Epson Scan Settings. For details, see the Epson Scan Help. ■ Make sure Epson Event Manager is set up to communicate with your product. Print a Network Status Sheet 1. Press , if necessary, then press l or r and select Setup. 2. Select Wi-Fi/Network Settings, then select Confirm Wi-Fi/Network Settings. 3. Press one of the x buttons to print the status sheet. Printing and Copying Problems ■ Make sure the paper size you loaded matches the paper size and source selected on the control panel or in your printer software. ■ Letter-size paper is automatically selected for copying. If your legal-size document is cropped, press d and select Reduce/Enlarge, then select Legal->Letter. ■ To select two-sided printing in Mac OS X, choose 2-sided Settings from the pop-up menu. Do not select Layout from the pop-up menu. ■ Position your original against the back left corner of the scanner glass. If the edges are cropped, move your original away from the edges slightly. Place the document flat against the scanner glass. ■ Printing stops when an ink cartridge is expended. If a color cartridge is expended, you may be able to continue printing temporarily with black ink; see the online User's Guide for more information. If the black cartridge is expended, you must replace it to continue printing. Printing and Copying Problems 31