Epson XP-620 User Manual - Page 249
Running a Product Check, LCD screen message, Condition/solution, Parent topic, Related references - ink pad
View all Epson XP-620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 249 highlights
LCD screen message Recovery mode Condition/solution An error has occurred during firmware updating. Connect your product using a USB cable and try updating the firmware again. If you still receive this error message, contact Epson for support. Note: The ink pads in the printer collect, distribute, and contain the ink that is not used on printed pages. During the life of your product it may reach a condition where either satisfactory print quality cannot be maintained or the ink pads have reached the end of their usable life. The Epson Status Monitor, your LCD, or lights on the control panel will advise you when these parts need replacing. If this happens during the standard warranty of the product, the exchange of the product or replacement of the pads is covered under the standard warranty. If the product is out of warranty, the pads can be replaced by any Epson authorized service provider. The waste ink pads are not a user-replaceable part. Parent topic: Solving Problems Related references Paper Jam Problems Inside the Product Paper Jam Problems in the Paper Cassette Paper Jam Problems in the Auto Duplexer Where to Get Help Related tasks Using AirPrint Selecting the Paper Settings for Each Source - Control Panel Related topics Loading Paper Using Memory Cards With Your Product Wi-Fi Networking Running a Product Check Running a product check helps you determine if your product is operating properly. 1. Disconnect any interface cables connected to your product. 2. Load plain paper in the product. 3. Press the home button, if necessary. 4. Press the arrow buttons to select Setup and press the OK button. 249