Esoteric D-05X Owners Manual EN FR SP - Page 16

Setting mode (continued) Clock output setting Automatic display darkening setting CLK_TH>*** DPaOFF>*** This sets the clock output when in a clock input mode (CLK>IN, MCK IN and MCK10M). By default, the setting is OFF. oo This setting can be made for each input. OFF No clock signal is output from the CLOCK SYNC OUT connector. ON Clock with the same frequency as the input clock is output from the CLOCK SYNC OUT connector. You can set the display to darken automatically after a set amount of time has elapsed. By default, the setting is ON. ON The display will automatically darken after 10 minutes elapse without any operation or change in the information shown. OFF The display will not automatically darken, but if nothing changes for 10 minutes, its brightness will be lowered to the level of DIMMER>1 to reduce long-term display fading. Dimmer setting DIMMER>*** oo We recommend setting this to ON because brightness irregularities might occur if the same information is shown without change on the display for a long time. You can adjust the brightness of this unit's display and indicators. By default, the setting is 2. Automatic power saving setting DIMMER>3 c DIMMER>2 c DIMMER>1 c DIMMER>0 (normal brightness) (off ) oo The dimmer of this unit can be adjusted using the DIMMER button of a remote control included with a P-05X or other ESOTERIC product. APS>*** The unit can be set to turn off automatically if the set amount of time elapses without being able to lock to a digital signal from an input source. oo By default, the setting is 30m. oo The input sources that are not selected have no effect on auto- matic power saving. 30m 30 minutes oo Even when set to DIMMER>1 or DIMMER>0 (off ), a brighter setting (DIMMER>2 or DIMMER>3) will be used when displaying error messages and setting menus. 60m 60 minutes 90m 90 minutes 120m 120 minutes OFF The automatic power saving function is disabled. 16