Fellowes AP-230PH Manual - Page 4

PRODUCT SPECIFICATIONS AP-230PH Room Area Served 230 sq. ft. Power Supply AC 120V/60Hz Power Rate Low 6W, Turbo 50W Fan Speed 4 Speeds Display LED Digital Control Type Auto/Manual Air Quality Sensor Yes Filters 1 True HEPA Filter 1 Carbon Filter Cleaning System Sanitized™ Carbon Filter True HEPA Filter PlasmaTrue™ CADR Color Dimensions Weight 150/161/156 (Smoke/Dust/Pollen) Metallic Silver and White 13.8"(W) X 9.1"(D) X 18.5"(H) 14 lbs AP-300PH 300 sq. ft. AC 120V/60Hz Low 6W, Turbo 70W 4 Speeds LED Digital Auto/Manual Yes 1 True HEPA Filter 1 Carbon Filter Sanitized™ Carbon Filter True HEPA Filter PlasmaTrue™ 191/200/201 (Smoke/Dust/Pollen) Metallic Silver and White 16.5"(W) X 9.8"(D) X 21.9"(H) 19 lbs FILTER SPECIFICATIONS True HEPA Filter Replacement Carbon Filter Replacement 9370001 9372001 9370101 9372101 INFORMATION TO THE USER This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equiment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one more of the following measures: - Reorient or relocate the receiving antenna - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. Warning Any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment. 4 AP-230PH_AP-300PH_ 869011_032211.indd 4-9 CARE AND MAINTENANCE CLEANING • Clean unit as necessary by wiping with a dry, soft cloth; for stubborn stains, use a warm, damp cloth. • Do not use volatile fluids such as benzene, paint thinner, or scouring powder, as they may damage the unit surface. • Keep the unit dry. • Clean the wall behind the air outlet periodically, as it may become dirty. Replacement Procedure 1. Remove the front panel by grasping the bottom outside edges and gently pulling toward you. 2. Pull out the filters that need to be changed. Filter Replacement The replacement filter indicator will signal when to replace the True HEPA Filter and/ or Carbon Filter. The replacement period will vary depending on the hours of use, air quality, and location of the unit. However, most True HEPA filters in normal use need to be replaced annually, and Carbon Filters every 3 months. Do not wash and reuse the True HEPA or Carbon Filters-they will not work effectively. 3. Remove any packaging wrap from the new filter(s). For replacemant filters, see page 4. WARNING: Before replacing any filters, make sure to remove the power plug from the wall outlet. 9 3/22/11 11:46 AM