Fellowes AP-230PH Manual - Page 6

Air Purifier Set-up, Display Panel Ap-230ph/ap-300ph - air purifier filter

Get Fellowes AP-230PH PDF manuals and user guides View all Fellowes AP-230PH manuals
Add to My Manuals
Save this manual to your list of manuals

Page 6 highlights

AIR PURIFIER SET-UP NOTE: Follow these instructions for best results. • Place unit at least 2 feet from the wall. • Keep unit away from drafty areas. • Keep curtains away from unit, as they may interfere with air intake/outlet. • Place unit on a stable surface with plenty of air circulation. 5. Replace the front panel by hooking the front panel on the top of the unit. Swing panel in by pushing gently until the panel snaps into place. 1. Remove protective film from the control panel. 2. Remove the front panel by grasping the bottom outside edges and gently pulling toward you. 6. Plug in the power cord to a wall outlet. 7. Press POWER button until short "beep" is heard. 3. Pull out the filter packages and remove sealed plastic wrap. 4. Return the filters to the unit, inserting the True HEPA first with the arrow pointing toward the back of of the unit and then insert the carbon filter. (See page 10) For the first 4 minutes after turning the unit on, the indicators will flash while the unit measures air quality. DISPLAY PANEL AP-230PH/AP-300PH 1 2 4 8 5 6 3 7 1. MANUAL FAN SPEED ADJUSTMENT - Press the + or - buttons to manually adjust fan speed to low, medium, high, turbo or auto speed. 2. AIR QUALITY LIGHT INDICATOR Green, yellow, and red lights indicate the purity of your air. 3. FAN SPEED INDICATOR Shows current fan speed setting: low, medium, high or turbo speed. 4. AUTO MODE - The unit is set to default to automatic operation when it is first turned on. Air purity sensor monitors the air and automatically adjusts the fan speed to keep your air purified. To go back to auto at any time, press "-" several times until auto lights up. 5. PLASMATRUE™ TECHNOLOGY Safely removes airborne pollutants at the molecular level instantly neutralizing viruses and bacteria in the air. Light indicators show PlasmaTRUE™ Technology in action! 6. CARBON FILTER CHANGE INDICATOR - The red indicator light will signal when to replace filter. (Recommended to replace filter every three months under normal usage conditions.) For replacement filters, see page 4. 7. TRUE HEPA FILTER CHANGE INDICATOR - Green, yellow and red light indicate when to replace filter. The red indicator lights will signal when to replace filter. (Recommended to replace filter every twelve months under normal usage conditions.) For replacement filters, see page 4. 8. POWER BUTTON - This unit is set to default to automatic operation when it is first turned on. The air purifier will automatically sense the amount of impurities in the air, and adjust the fan speed accordingly. 6 AP-230PH_AP-300PH_ 869011_032211.indd 6-7 7 3/22/11 11:46 AM

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
NOTE:
Follow these instructions for
best results.
• Place unit at least 2 feet from the wall.
• Keep unit away from drafty areas.
• Keep curtains away from unit, as they
may interfere with air intake/outlet.
• Place unit on a stable surface with plenty
of air circulation.
1. Remove protective
fi
lm from the
control panel.
2. Remove the front panel by grasping the
bottom outside edges and gently pulling
toward you.
3. Pull out the
fi
lter packages and remove
sealed plastic wrap.
4. Return the
fi
lters to the unit, inserting the
True HEPA
fi
rst with the arrow pointing
toward the back of of the unit and then
insert the carbon
fi
lter. (See page 10)
5. Replace the front panel by hooking the
front panel on the top of the unit. Swing
panel in by pushing gently until the panel
snaps into place.
6. Plug in the power cord to a wall outlet.
7. Press POWER button until short “beep”
is heard.
AIR PURIFIER SET-UP
For the
fi
rst 4 minutes after turning the
unit on, the indicators will
fl
ash while the
unit measures air quality.
1
2
3
5
6
8
4
7
DISPLAY PANEL AP-230PH/AP-300PH
1. MANUAL FAN SPEED
ADJUSTMENT -
Press the + or –
buttons to manually adjust fan speed to
low, medium, high, turbo or auto speed.
2.
AIR QUALITY LIGHT INDICATOR -
Green, yellow, and red lights indicate
the purity of your air.
3.
FAN SPEED INDICATOR -
Shows current fan speed setting: low,
medium, high or turbo speed.
4. AUTO MODE -
The unit is set to default
to automatic operation when it is
fi
rst
turned on. Air purity sensor monitors
the air and automatically adjusts the
fan speed to keep your air puri
fi
ed. To
go back to auto at any time, press “–”
several times until auto lights up.
5. PLASMATRUE™ TECHNOLOGY -
Safely removes airborne pollutants at
the molecular level instantly neutralizing
viruses and bacteria in the air. Light
indicators show PlasmaTRUE™
Technology in action!
6. CARBON FILTER
CHANGE INDICATOR -
The red
indicator light will signal when to replace
fi
lter. (Recommended to replace
fi
lter
every three months under normal usage
conditions.) For replacement
fi
lters, see
page 4.
7.
TRUE HEPA FILTER CHANGE
INDICATOR -
Green, yellow and red
light indicate when to replace
fi
lter. The
red indicator lights will signal when to
replace
fi
lter. (Recommended to replace
fi
lter every twelve months under normal
usage conditions.) For replacement
fi
lters, see page 4.
8. POWER BUTTON -
This unit is set to
default to automatic operation when
it is
fi
rst turned on. The air puri
fi
er will
automatically sense the amount of
impurities in the air, and adjust the fan
speed accordingly.
6
7
AP-230PH_AP-300PH_ 869011_032211.indd 6-7
AP-230PH_AP-300PH_ 869011_032211.indd
6-7
3/22/11 11:46 AM
3/22/11
11:46 AM