Fender Deluxe Reverb Solid State Owner Manual - Page 6

off-ground Switch: nbined for easy ration. To turn the puffier on, move the tch either up or down n the center off ition (on or reverse). luld you experience a noise or hum from iroperly polarized line or touching tal parts, simply ve the On-off-ground tch to the other reme up or down ,ition. oil-Ground Switch REAR CONTROLS NOTE: On export Model, AC Accessory Socket is replaced by Main Selector Switch and Fuse Holder. When selecting voltages use HIGHEST VOLTAGE SETTING FIRST. O AC Accessory Socket: 110V - 120V 60 Hz is available at this socket whether or not the amplifier is turned "on" or "off." Load on Accessory Socket should be limited to 200-Watt maximum load. AC Accessory Socket Vib-Rev Jack: Dual foot switch control jack allows foot switch selection of Vibrato and Reverb to "on" or "off" when Fender remote foot switch is plugged into this jack. VIVO Revere Jack Circuit Breaker: For extra convenience, a Circuit Breaker rather than a line fuse has been installed on the back panel. Should a surge in line power cause the amplifier to temporarily cease operation, simply push the red button marked "reset." Circuit Breaker Speaker Jack Internal: Connects internal speaker to amplifier. Caution: Extension speakers can be used with this jack, but any combination should result in four ohms input impedance minimum to prevent mismatch. Internal Speakers Jack External Speaker Jack: Provides instant connection to a second speaker such as the Fender 12", 15" or piggy back extension speakers. External Speakers Jack 50 S 4050 0 [Vii ,F,DE IN U.