Fender FM 15 DSP Owners Manual - Page 6

6 FM15 DSP Your new FM15 DSP amplifier delivers world-class Fender® tone and world-standard Fender® DSP technology: • 15 Watts into 8 ohms • Digital Signal Processing • 15 Effects "FX" settings • 16 Amplifier "TYPE" settings • 1 Classic Fender® clean tone (Channel 1) • 2 Channels-independent settings and sounds • Push-button channel switching • Headphones jack-for silent practice • Auxiliary Input-connect your MP3/CD player or drum machine for accompaniment Thank you for choosing Fender®® -Tone, Tradition and Innovation-since 1946 Features Channel 1 Channel 2 A. INPUT - Plug your guitar in here. B. CHANNEL SELECT - Press to switch between channels: CH 1 CH 2 C. CH1 VOLUME - Adjusts the loudness of Channel 1. D. GAIN - Adjusts the distortion level of Channel 2 (except when Acoustic is the selected Amp Type {F}). E. CH2 VOLUME - Use to adjust the loudness of Channel 2 after you have set the Gain {D} level. F. AMP TYPE - Selects the amplifier circuit design of Channel 2 (see next page). G. TREBLE/MIDDLE/BASS - Adjusts the tone in the high/mid/low frequency bands respectively. H. FX SELECT - Selects the active effect for both channels (see next page). I. AUX IN - Input jacks for connecting your MP3/CD player or drum machine. Use the volume control on the external device to adjust the loudness of this input. The Auxiliary input accepts "RCA" type plugs. J. HEADPHONES - Output jack for connecting headphones. This jack can also be used as a line output to mixer or other equipment. The FM15 DSP speaker is disabled when this jack is used. / The Headphones jack accepts a standard 1/4" mono or stereo plug. K. POWER LED - Indicates when the amplifier is ON. Rear Panel L. POWER CORD SOCKET Connect the included power cord in accordance with the voltage and frequency ratings specified on the rear panel of your amplifier. M. POWER SWITCH - Switches the amplifier ON-OFF. " f e n d e r. c o m "