Fender Hot Rod Deluxe Owners Manual - Page 7

ENGLISH ENGLISH Fender® Hot Rod™ Deluxe 7 ESPAÑOL ESPAÑOL FRANçAIS FRANçAIS ITALIANO ITALIANO T. POWER CORD - Connect the power cord in accordance with the voltage and frequency ratings listed on the rear panel of the unit. U. FUSE - The fuse protects the unit from electrical faults. Replacement fuses must match the type and rating specified on the fuse holder. If the unit repeatedly blows fuses, have the unit tested at an authorized Fender® Service Center. V. MAIN SPEAKER - One of the following speaker load configurations (internal or external) must always be connected as shown below, when the unit is on: V. W. 1. 2. 3. * *Insert an open plug (no speakers connected) for this configuration. W. EXTERNAL SPEAKER - This jack is wired in parallel with the main speaker jack and must only be used with something connected to the main speaker jack as shown in the MAIN SPEAKER {V} description above. X. FENDER®/GROOVE TUBES™ GT6L6B - The output tubes in your new Hot Rod™ amplifier are performance matched and labeled as a color-coded pair. When replacing these tubes, we recommend selecting new tubes that have the same red, white or blue color labels as the originals. Otherwise, tube bias may need adjustment. See Specifications below for your color coded part number. Y. PREAMP TUBE STABILIZER A vibration-absorbing stabilizer is installed around the preamp tubes to minimize tube microphonics that normally develop over time. The stabilizer can be used with all preamp tubes compatible with your Hot Rod™ amplifier. TYPE: PART NUMBERS: POWER REQUIREMENT: POWER OUTPUT: INPUT 1/2 IMPEDANCES: PRE-AMP OUTPUT IMPEDANCE: POWER-AMP INPUT SENSITIVITY: POWER-AMP INPUT IMPEDANCE: TUBES: *(Tube label color: Red=1, White=2, Blue=3) FUSE: SPEAKER: FOOTSWITCH: DIMENSIONS WEIGHT: HEIGHT: WIDTH: DEPTH: Specifications PR 247 021-3202-000 (120V, 60Hz) USA 021-3232-000 (240V, 50Hz) AUS 021-3242-000 (230V, 50Hz) UK 021-3262-000 (230V, 50Hz) EUR 021-3272-000 (100V, 50/60Hz) JPN 180W 40W into 8Ω or 4Ω at 5% THD 1 MΩ / 136 kΩ 1.5 kΩ Max 200 mV for clipping 54 kΩ Three Fender Groove Tube GT12AX7 (099-4005-000) Two Fender Groove Tube GT6L6B (099-4401-*02) 3A 250V fuse (100V and 120V versions) 1.6A 250V fuse (230V and 240V versions) One 12" 8Ω Fender Re-issue Gold Label (037617) 2 Button: Gain, Channel (050419) 18.75 in 23.5 in 10.5 in (47.6 cm) (59.7 cm) (26.7 cm) 49.5 lb (22.5 kg) Product specifications are subject to change without notice. www.f e n d e r.com ✧ www. m r g e a r h e a d .net DEUTSCH DEUTSCH