Fender M-80 Preamp Owner Manual - Page 4
connection.
View all Fender M-80 Preamp manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
PRESENCE VOLUME 4 6 6 4 5 6 I 8 2 9 1 10 SELECT I8 9 10 VE CHANNEL FOOT SWITCH EFFECTS ON/OFF SELECT HEAD PHONES LEVEL 4 56 3 2' 8 9 0 10 M-80 PRE-AMP POWER K M 0 R S K. PRESENCE- Adjusts the amount of boost or cut in the upper high frequency range while in the OVERDRIVE channel. This control occurs post preamp distortion and is useful in adjusting the distortion characteristic from smooth to brash. L. CHANNEL SELECT-Activates the OVERDRIVE channel. NOTE: This switch disables the Channel Select Footswitch. M. VOLUME-Adjusts the overall loudness while in the OVERDRIVE channel. N. FOOTSWITCH- Plug-in connection for remote footswitch to switch between the CLEAN channel and the OVERDRIVE channel, also switches the effects loop on and off. NOTE: Any good quality patch cord will work with the remote footswitch, however a speaker grade cord is preferable to a coax guitar cord when it's available. O. EFFECTS SELECT- Activates effects loop. NOTE: This switch disables the Effects On/Off Footswitch. P. EFFECTS INDICATOR- This LED is illuminated when the effects loop is activated. Q. HEADPHONES- This jack provides an output to standard stereo or mono headphones for private listening. CAUTION: Prolonged listening at high levels may be hazardous to your hearing! This jack can also be used as an unbalanced line output, which is post effects-loop, by using either a stereo or mono 1/4 inch phone plug connection. R. HEADPHONE LEVEL CONTROL- Adjusts the loudness of the headphones. S. POWER SWITCH- Turns AC power ON and OFF. When the switch is OFF the amplifier is completely shut down.