Fender Mustang Mini Advanced Owner Manual - Page 4

MUSTANG™ MINI Save Button Your Mustang Mini amplifier gives you the powerful ability to save every setting on the amplifier as part of a preset. The SAVE button will light up red when you turn any programmable knob on the amplifier. This indicates that you have temporarily modified the current preset. You can undo your modifications simply by selecting a different preset using the PRESET knob, then turning back to the original preset. ♫ The EXIT button will not cancel changes to the current preset. Only by selecting a different preset using the PRESET knob, the footswitch or Fender FUSE, will your temporary changes be erased. To save your own custom preset: 1. To save a preset you must first modify an existing preset by turning any of the programmable knobs, such as GAIN (once the SAVE button is illuminated, you can proceed to step 2). 2. Press the SAVE button. The SAVE and EXIT buttons should be flashing rapidly. You can press EXIT at this point to cancel the save process. 3. Turn the PRESET knob to select a preset to overwrite. You can only overwrite the red and green banks of the amplifier type that you started from (if you started by modifying the amber bank, you must select either the red or green bank to overwrite). ♫ You can save over the AMBER bank of presets only by using Fender® FUSE™ software. 4. Press the SAVE button again to confirm the save. Your new preset has been created! Aux / Phones Jacks Auxiliary Input You can use the Auxiliary jack to input audio into your Mustang Mini amplifier for accompaniment. Connect the headphone output on your CD player or MP3 player to the AUX jack using a mini-stereo cable. Use the volume control on your player, together with the MASTER volume knob on the Mustang Mini, to adjust the auxiliary volume level. Phones Jack Plug in your headphones, ear buds, or powered speakers to enjoy the Mustang Mini's stereo features. This jack may also be used as a stereo recording output. The amp's internal speaker is muted when the PHONES jack is used. Footswitch Connect a (optional) 1-button footswitch (P/N 0994049000) into the FTSW jack to enable remote selection of your two favorite presets. The LED above the FTSW jack will turn red or green to indicate which footswitch preset is active. To program the footswitch: 1. Select a preset that you want to assign to the footswitch. The preset must not be modified (the SAVE button must NOT be illuminated to proceed to step 2). 2. Press the SAVE button. The SAVE and EXIT buttons should be flashing rapidly. You can press EXIT at this point to cancel the footswitch assignment process. 3. Press the footswitch button to select either the red or green LED above the FTSW jack that you wish to associate with the current preset. 4. Press the SAVE button to confirm the footswitch assignment. Now, when you press the footswitch, the chosen preset will be activated with the assigned red or green footswitch indicator. USB Port Use the USB port to connect the Mustang™ Mini amplifier to your computer and take your music to the next level: • Use Fender® FUSE™ software to control the Mustang Mini from your computer and access bonus amp features not available from the amplifier alone. • Record and edit Mustang Mini audio using your favorite recording software. ♫ You can adjust the USB recording volume level by pressing and holding the EXIT button while you turn the VOLUME knob. • Stream live audio and play with people around the world using Fender® BAND JAM, powered by eJamming® AUDiiO. ♫ For a 30-day trial subscription to Fender BAND JAM, visit: www.fender.com/ejamming 4 fender.com